2018-11-23, 23:56
I've just setup my RPI 3B+ with LibreElec 17.6. I'm using it with the official PSU that I was using with the RPI2 but I'm seeing the warning lightning bolt on screen a lot, so before I update to the latest testbuild is there anything I can set in the config.txt that will solve whatever problem that's indicating? The only USB device I have plugged in is the IR receiver and I'm using an Ethernet cable at the moment.
The log shows this for the config currently:
The log shows this for the config currently:
Code:
arm_freq=1400
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x33e140
desired_osc_freq_boost=0x3c45b0
disable_commandline_tags=2
disable_l2cache=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
hdmi_channel_map=8
hdmi_edid_file=1
hdmi_force_cec_address=65535
hdmi_force_hotplug=1
hdmi_ignore_cec_init=1
init_uart_clock=0x2dc6c00
lcd_framerate=60
over_voltage_avs=62500
over_voltage_avs_boost=0x2932e
over_voltage_sdram_p=2
overscan_bottom=48
overscan_left=48
overscan_right=48
overscan_top=48
pause_burst_frames=1
program_serial_random=1
sdram_freq=500
sdram_schmoo=0x2000020