•   
  • 1
  • 35
  • 36
  • 37
  • 38
  • 39(current)
WIP Ember Media Manager 1.9.x - Download & Discussion Thread
A small status update: Two weeks ago I wanted to quickly incorporate multi-rating, "Premiered" instead of "ReleaseDate" (for movies) and also support for keyarts, and thought that I could take over most of that from Ember 3.0. Unfortunately the whole thing "degenerated" again and I've been writing code since 2 weeks. It will probably take another week until there is a new release. In the meantime you can secure an API key at OMDb, because there will also be a new scraper for IMDb, RT and Metacritic ;-)
Reply
(2021-02-07, 01:09)DanCooper Wrote: A small status update: Two weeks ago I wanted to quickly incorporate multi-rating, "Premiered" instead of "ReleaseDate" (for movies) and also support for keyarts, and thought that I could take over most of that from Ember 3.0. Unfortunately the whole thing "degenerated" again and I've been writing code since 2 weeks. It will probably take another week until there is a new release. In the meantime you can secure an API key at OMDb, because there will also be a new scraper for IMDb, RT and Metacritic ;-)

Thanks for the update, Dan.
Reply
(2021-02-07, 00:59)DanCooper Wrote:
(2021-02-06, 17:16)Hairy Hippy Wrote: however when I mark it again as the same dark blue to clear the custom, it turns a light blue
Custom #4 is light blue by default. Another way to check if the movie has more than one custom marking is to use the filter tab below the list and select each custom marking filter successively. It's possible to set all markers at the same time for a movie.
I think i need a new way (not colors) to get a better solution for custom marking in Ember 3.0 Smile
(2021-02-06, 17:16)Hairy Hippy Wrote: Regarding the title sorting, you are right if I am sorting by "title" or "original title", however, if I sort by say "MPAA", most titles are sorted in alphabetical order, except for movies starting with an accent or cedilla.  Why would these be moved to the end of the MPAA section (e.g. UK:12 or UK:15) when sorting in this manner instead of how they are sorted if using the title sort?
Goof question... I'm not shure how .NET sorts or determines the second row to sort. I think i don't have set any column so that it's still ordered by title if you use another column as primary column.
I've not marked any with custom #4 as only using #1 and #2 at the moment, so it's odd that when I mark something with #2, when I unmark it, it turns light blue.  However, if I now click custom #4 it now turns black text  Smile !  Odd step to have to take but at least it solves the issue.

As for the sorting, not the end of the world but so annoying!  Rofl
Reply
Bit of a weird one today...

EMM scrapped and created the nfo (today) however when I reload the movie (F5) or rescan the library, for some reason EMM is changing this to a ".info" (aka invalid .nfo).  Very strange...  Only one EMM is doing this to; all others created today are fine.

Please let me know what other information you need to try to resolve this as it's happening every time I rescan the library.  I have asked EMM to recreate the nfo (twice) and when it changing it to .info, changing it back to .nfo manually.

Edit:  I had a good look through the nfo and the only thing I could find/think could be causing the issue was the below, so I deleted it out of the .nfo and it worked.  Question though, if EMM created it, then why would it think this is invalid?

      <audio>
        <channels>2</channels>
        <codec>aac</codec>
        <language>Unknown</language>
        <longlanguage>gos&#x3;</longlanguage>
      </audio>
Reply
(2021-02-07, 01:09)DanCooper Wrote: A small status update: Two weeks ago I wanted to quickly incorporate multi-rating, "Premiered" instead of "ReleaseDate" (for movies) and also support for keyarts, and thought that I could take over most of that from Ember 3.0. Unfortunately the whole thing "degenerated" again and I've been writing code since 2 weeks. It will probably take another week until there is a new release. In the meantime you can secure an API key at OMDb, because there will also be a new scraper for IMDb, RT and Metacritic ;-)
Thank you for the update Dan.

I have not had a chance to use the latest version yet or EMM at all since TVDB moved to a subscription service. What is the recommended scraper order for TV shows right now?
Reply
Exclamation 
Hi,

Sorry if my question is quite naive.

I am installing EMM 1.9 on my new device (PC under windows 10). I want to use Kodi Interface using default configuration (localhost port 8080) as before. I got an error "Problème de communication avec l'hôte" meaning unable to connect to host.
Checking on old device with EMM 1.5, I got the same error.
Can you give me any advice?

Moreover, a wiki on KI setting will be great. It is quite difficult to find valuable information on the forum.

Last but not least, you mention that Bonjour application is required to use KI through a network. This application is no more available on Apple site. Can you provide a new link?

Thanks for your job, EMM is very power- and useful anyway.
All the best
Reply
(2021-02-10, 16:00)Hairy Hippy Wrote: Bit of a weird one today...

EMM scrapped and created the nfo (today) however when I reload the movie (F5) or rescan the library, for some reason EMM is changing this to a ".info" (aka invalid .nfo).  Very strange...  Only one EMM is doing this to; all others created today are fine.

Please let me know what other information you need to try to resolve this as it's happening every time I rescan the library.  I have asked EMM to recreate the nfo (twice) and when it changing it to .info, changing it back to .nfo manually.

Edit:  I had a good look through the nfo and the only thing I could find/think could be causing the issue was the below, so I deleted it out of the .nfo and it worked.  Question though, if EMM created it, then why would it think this is invalid?

      <audio>
        <channels>2</channels>
        <codec>aac</codec>
        <language>Unknown</language>
        <longlanguage>gos&#x3;</longlanguage>
      </audio>

I have seen this Happen when another software is actually writing nfo & then ember turns that into an .info and creates a new one or vice versa. 
Do you have radarr or similar setup as that can create a basic nfo .
Or did you install any other media manager ?
Reply
Hello,
First; i tell you that I find : EMM is really great  Cool

Then, I have took the time to modify the "MovieHomepage" export template in French and I have took the opportunity to correct some display bugs, and add the links of the Youtube-trailers. I can send it to you if someone is interested...
Too bad there is not the "TVShows" and "Sets" part that works (for these last parts, I have modified the "modernWallCard" template in French).


But I am writing to you for something else:

I started to fill-in the URL-YouTube-trailer of each Movies, and until yesterday, in the "Edit Movies tabs", I clicked on the green "+" on the "Trailer URL:" line, a new window opens it, and there I can click on "Search".
Yesterday, February 18, 2021, after a while, a list was added, and I could choose a trailer.

I had already done almost half of my media-library, but since this morning, 19.02.2021, when I click on "Search", I have a return pop-up:"No Trailers found"; and on all "Edit Movies tabs".
I tried to search for two or three movies, directly on the youtube page in my internet-browser, and I find trailer-links there on the internet. But when I copy the YouTube-URL of the page found in the "Custom" -> "Direct Link or Youtube URL" field of the "Select Trailer to download"-page, and I click on "Set To Nfo", the program searches for the link and displays after a while return pop-up:"No Trailers found", but the link is working great Huh

Does Youtube "broken" something in the "search API" of the EMM program ? Confused


PS: In the meantime, I copy the link found from my Internet-Browser directly into the "Trailer URL" field (without clicking on the "+" green) in the "Edit Movies tabs" and "OK", and there the Nfo and the database is updated Wink But is nice if the "+" green" works again....
Reply
(2021-02-19, 03:24)shaktoo Wrote:
(2021-02-10, 16:00)Hairy Hippy Wrote: Bit of a weird one today...

EMM scrapped and created the nfo (today) however when I reload the movie (F5) or rescan the library, for some reason EMM is changing this to a ".info" (aka invalid .nfo).  Very strange...  Only one EMM is doing this to; all others created today are fine.

Please let me know what other information you need to try to resolve this as it's happening every time I rescan the library.  I have asked EMM to recreate the nfo (twice) and when it changing it to .info, changing it back to .nfo manually.

Edit:  I had a good look through the nfo and the only thing I could find/think could be causing the issue was the below, so I deleted it out of the .nfo and it worked.  Question though, if EMM created it, then why would it think this is invalid?

      <audio>
        <channels>2</channels>
        <codec>aac</codec>
        <language>Unknown</language>
        <longlanguage>gos&#x3;</longlanguage>
      </audio>

I have seen this Happen when another software is actually writing nfo & then ember turns that into an .info and creates a new one or vice versa. 
Do you have radarr or similar setup as that can create a basic nfo .
Or did you install any other media manager ?
No only EMM.  What was weird was EMM created the nfo in the 1st place only minutes before, then when reloaded (as I moved the movie to its correct folder) it then changed it to .info.
Reply
  •   
  • 1
  • 35
  • 36
  • 37
  • 38
  • 39(current)



Logout Mark Read Team Forum Stats Members Help
Ember Media Manager 1.9.x - Download & Discussion Thread2
This forum uses Lukasz Tkacz MyBB addons.