2021-01-17, 17:14
Hello,
I am completely new to Kodi and just installed Kodi (Starting Kodi (18.8 (18.8.0) Git:20201002-nogitfound). Platform: Linux x86 64-bit) via flatpak from flathub.
System: Linux vdr1 4.19.0-13-amd64 #1 SMP Debian Buster 4.19.160-2 (2020-11-28) x86_64 GNU/Linux
I have problems to get my Remote-IR (Hauppauge_350) running with Kodi. It is working with a VDR-System.
Lircd is running, the IR is working via vdr-sxfe --lirc just like it should and vdr itself, which is running in the background does not uses lirc, because the remote is connected via the vdr-sxfe frontend on frontend start.
irw shows (vdr-sxfe and kodi is stopped):
Lirdc.conf:
I created Lircmap.xml (https://kodi.wiki/view/LIRC):
an put it in: ~/.var/app/tv.kodi.Kodi/data/userdata
but Kodi does not recognize any keypress on the remote.
What am I doing wrong?
~/.var/app/tv.kodi.Kodi/data/temp/kodi.log tells me that:
021-01-17 15:47:53.437 T:140346546076288 NOTICE: special://masterprofile/ is mapped to: /home/vdr/.var/app/tv.kodi.Kodi/data/userdata
so Lircmap.xml sould be at the right place.
LIRC is running, irw shows the right codes, lircd.conf is up and other applications using the remote like vdr-sxfe are working with the remote.
lircd listen on: /var/run/lirc/lircd
and in dev there is: /dev/lirc0
kodi itself is started via: /usr/bin/flatpak run --branch=stable --arch=x86_64 --command=kodi tv.kodi.Kodi
In the kodi.log there is no string connected with lirc found.
Is thereperhaps a command option missing to activate lirc on kodi startup?
All other config xml files are unmodified at there base location under:
/var/lib/flatpak/app/tv.kodi.Kodi/x86_64/stable/75a8cbf685c9d1c1b35e30853f45a7590bc8882404bb44888efb5bc21f51aabc/files/share/kodi/system
Any help would be great to get my working remote-IR running with kodi.
Best regards,
Bernd
I am completely new to Kodi and just installed Kodi (Starting Kodi (18.8 (18.8.0) Git:20201002-nogitfound). Platform: Linux x86 64-bit) via flatpak from flathub.
System: Linux vdr1 4.19.0-13-amd64 #1 SMP Debian Buster 4.19.160-2 (2020-11-28) x86_64 GNU/Linux
I have problems to get my Remote-IR (Hauppauge_350) running with Kodi. It is working with a VDR-System.
Lircd is running, the IR is working via vdr-sxfe --lirc just like it should and vdr itself, which is running in the background does not uses lirc, because the remote is connected via the vdr-sxfe frontend on frontend start.
irw shows (vdr-sxfe and kodi is stopped):
shell:
vdr@vdr1:~$ irw
00000000000017bb 00 Go Hauppauge_350
00000000000017bd 00 Power Hauppauge_350
0000000000001794 00 Up Hauppauge_350
0000000000001795 00 Down Hauppauge_350
0000000000001796 00 Left Hauppauge_350
0000000000001797 00 Right Hauppauge_350
Lirdc.conf:
shell:
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
I created Lircmap.xml (https://kodi.wiki/view/LIRC):
shell:
<lircmap>
<remote device="Hauppauge_350">
<left>Left</left>
<right>Right</right>
<up>Up</up>
<down>Down</down>
<select>OK</select>
<back>Back/Exit</back>
an put it in: ~/.var/app/tv.kodi.Kodi/data/userdata
but Kodi does not recognize any keypress on the remote.
What am I doing wrong?
~/.var/app/tv.kodi.Kodi/data/temp/kodi.log tells me that:
021-01-17 15:47:53.437 T:140346546076288 NOTICE: special://masterprofile/ is mapped to: /home/vdr/.var/app/tv.kodi.Kodi/data/userdata
so Lircmap.xml sould be at the right place.
LIRC is running, irw shows the right codes, lircd.conf is up and other applications using the remote like vdr-sxfe are working with the remote.
lircd listen on: /var/run/lirc/lircd
and in dev there is: /dev/lirc0
kodi itself is started via: /usr/bin/flatpak run --branch=stable --arch=x86_64 --command=kodi tv.kodi.Kodi
In the kodi.log there is no string connected with lirc found.
Is thereperhaps a command option missing to activate lirc on kodi startup?
All other config xml files are unmodified at there base location under:
/var/lib/flatpak/app/tv.kodi.Kodi/x86_64/stable/75a8cbf685c9d1c1b35e30853f45a7590bc8882404bb44888efb5bc21f51aabc/files/share/kodi/system
Any help would be great to get my working remote-IR running with kodi.
Best regards,
Bernd