2008-12-04, 22:56
Hello and thank you for your great help!
However, I'd like to add some comments as you solution did not work "out of the box" for me.
I am using an Antec Fusion Remote Black with a RM200 VERIS remote and add some problems getting the two lircd working together.
I ran two irrecord, the first one on /dev/lirc0 putting configuration on /etc/lirc/remote1.conf about the pad and the numbers on remote and the second one on /dev/lirc1 putting configuration on /etc/lirc/remote2.conf about the other keys.
Once this done, I ran the following commands:
This is now working and the irw mixes the two parts of the remote.
Hope it will help
Philippe
However, I'd like to add some comments as you solution did not work "out of the box" for me.
I am using an Antec Fusion Remote Black with a RM200 VERIS remote and add some problems getting the two lircd working together.
I ran two irrecord, the first one on /dev/lirc0 putting configuration on /etc/lirc/remote1.conf about the pad and the numbers on remote and the second one on /dev/lirc1 putting configuration on /etc/lirc/remote2.conf about the other keys.
Code:
sudo irrecord /etc/lirc/remote1.conf -d /dev/lirc0 --disable-namespace
sudo irrecord /etc/lirc/remote2.conf -d /dev/lirc1 --disable-namespace
Once this done, I ran the following commands:
Code:
sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --pidfile=/var/run/lirc0.pid --listen=8765 /etc/lirc/remote1.conf
sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc1 --pidfile=/var/run/lirc1.pid --connect localhost:8765 --output=/dev/lircd /etc/lirc/remote2.conf
This is now working and the irw mixes the two parts of the remote.
Hope it will help
Philippe