2009-01-19, 21:45
philippeb06 Wrote:Hello and thank you for your great help!
However, I'd like to add some comments as you solution did not work "out of the box" for me.
I am using an Antec Fusion Remote Black with a RM200 VERIS remote and add some problems getting the two lircd working together.
I ran two irrecord, the first one on /dev/lirc0 putting configuration on /etc/lirc/remote1.conf about the pad and the numbers on remote and the second one on /dev/lirc1 putting configuration on /etc/lirc/remote2.conf about the other keys.
Code:sudo irrecord /etc/lirc/remote1.conf -d /dev/lirc0 --disable-namespace
sudo irrecord /etc/lirc/remote2.conf -d /dev/lirc1 --disable-namespace
Once this done, I ran the following commands:
Code:sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --pidfile=/var/run/lirc0.pid --listen=8765 /etc/lirc/remote1.conf
sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc1 --pidfile=/var/run/lirc1.pid --connect localhost:8765 --output=/dev/lircd /etc/lirc/remote2.conf
This is now working and the irw mixes the two parts of the remote.
Hope it will help
Philippe
philippe: Could you please provide the conf-files you've recorded with irrecord? I can record on /dev/lirc0 but on /dev/lirc1 is always busy (even though I thought that I've made sure no process is using it).
/Andreas