2009-01-24, 03:36
I have got my "Antec Fusion Remote" case working atleast somewhat together with the RM200 remote that came with it (ubuntu 8.10 and cvs lirc as suggested here).
It seems to me that remote commands are recieved on /dev/lirc0 and the volume knob on the case is on /dev/lirc1, both of them are working at the same time when using irw, except for one detail: Only about half of the buttons on the remote seems to be working. All buttons that work begins with either 0x01 or 0x02, and those that do not work begin with 0x2 (These 0x2 buttons does not register at all in irw/mode2 --raw)
Anyone got any idea what could be causing this behaviour?
snippets from the remote conf:
It seems to me that remote commands are recieved on /dev/lirc0 and the volume knob on the case is on /dev/lirc1, both of them are working at the same time when using irw, except for one detail: Only about half of the buttons on the remote seems to be working. All buttons that work begins with either 0x01 or 0x02, and those that do not work begin with 0x2 (These 0x2 buttons does not register at all in irw/mode2 --raw)
Anyone got any idea what could be causing this behaviour?
snippets from the remote conf:
Code:
begin remote
name rm200d1.conf
bits 64
eps 30
aeps 100
one 0 0
zero 0 0
gap 139998
ignore_mask 0x0000000000000301
min_repeat 1
toggle_bit 0
begin codes
KEY_EXIT 0x2881d5b700000201 # AppExit FAILS
KEY_POWER 0x289115b700000201 # Power FAILS
MouseKeyboard 0x299115b700000201 # Mouse/Keyboard FAILS
KEY_1 0x0200001e00000201 # 1 WORKS
KEY_2 0x0200001f00000201 # 2 WORKS
KEY_UP 0x0100800000000201 # Pad Up WORKS
KEY_DOWN 0x01007f0000000201 # Pad Down WORKS
end codes
end remote