[NismoC32]

The lirc_atiusb module failed to build (probably because the old atiusb code is incompatible with the new lirc_dev code). I had the same problem and cleaned up all the devices I don't need.

I could send you my cleaned up code but I patched it for my 045e:0039 device. Which device do you have?

Hey thanks for the reply, I have this device 15c2:0038. It came with my Silverstone CW02 case.

After starting from scratch again I managed to get the "irw" to detect all my buttuns except the knob button witch is only detected like this, no mater where on the knob i press:

0100800000000000 00 knop lircd0.conf
0100800000000000 01 knop lircd0.conf
0100800000000000 02 knop lircd0.conf
0100800000000000 03 knop lircd0.conf
0100800000000000 04 knop lircd0.conf

I have no idea why. UPDATE look at next post.



What did you do to assign the different config files to right device so it is there when you reboot?
Now I have enter this command everytime I reboot:

/usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --pidfile=/var/run/lirc0.pid --listen=8765 /etc/lirc_imon.0.conf
/usr/local/sbin/lircd --driver=default --device=/dev/lirc1 --pidfile=/var/run/lirc1.pid --connect localhost:8765 --output=/dev/lircd /etc/lirc_imon.1.conf

The other problem is that XBMC doesn't pick up on any buttons. (Any chance you can post your Lircmap.xml file?)
And neater does the display, but using the pearl

Code:

perl -e 'print pack "H*", "80000000091e0088"' > /dev/lcd0

works fine

PS: Are you sure your device is 045e:0039 ? My search on this number it comes up as Microsoft Intellimouse