2009-08-18, 20:44
JS36 Wrote:I can help you. Don't give up yet, i had to spend around 20-30h to figure out how to do but learned alot so i think i can help. What type of remote do you use?I've tried all this, but I can't load the module lirc_it87. When I try 'modprobe lirc_it87' it says:
sudo apt-get install lirc (configure with the remote you want to use, i choose MCEUSB new Philips et al and emulated it with my logitech harmony 555)
sudo apt-get install dialog
sudo su
cd /usr/src
wget http://www.lirc.org/software/snapshots/l...e1.tar.bz2
tar xvfj lirc-0.8.6pre1
cd lirc-0.8.6pre1
sh setup.sh
Driver configuration(1) > IrDa/CIR hardware(6) > ITE IT8712/IT8705/IT8720 CIR port (3) and "save configuration & run configure" in first menu
make
make install
nano /etc/modules add lirc_dev and lirc_it87
nano /etc/lirc/hardware.conf change to this REMOTE_MODULES="lirc_dev lirc_it87"
reboot or restart lirc and it should work
otherwise try modprobe lirc_dev && modprobe lirc_it87 and see if you get /dev/lirc0 and try sudo mode2 /dev/lirc0 and press buttons on remote
Quote:FATAL: Error inserting lirc_it87 (/lib/modules/2.6.28-11-generic/misc/lirc_it87.ko): Unknown symbol in module, or unknown parameter (see dmesg)
dmesg returns:
Quote:[684.490019] lirc_it87: Unknown symbol lirc_unregister_driver
[684.490126] lirc_it87: Unknown symbol lirc_register_driver
(modprobe lirc_dev works though...)