2010-02-03, 18:31
following more work on this topic I have modified the contents of /etc/sensors3.conf to add information for this chip this means you get more information regarding the hw which is actually at work.
to add this (completely at your own risk) do the following
just below the line which says
#### Here begins the real configuration file
copy and paste this
the result of sensors should be something like this
As you can see you get both cores temperature and one fan reports its speed though I am sure that is really the case fan since the cpu fan is no able to achieve those rpm's
This information is based on this post found here
this code needs a bit more tweaking but it works accurately for both core temps...
Still todo
as none of the current work for me with this file nor without it...
Since I have no clew how to on that front maybe someone else can share...
If any of you guys found my, andyblac's and monty0815 post helpful pls rep up.
to add this (completely at your own risk) do the following
Code:
nano /etc/sensors3.conf
#### Here begins the real configuration file
copy and paste this
Code:
##Start of chip "w83667hg-*"
chip "w83667hg-*"
label in0 "VCore"
label in1 "VIN0 +12V"
label in2 "AVCC"
label in3 "3VCC"
label in4 "VIN1"
label in5 "VIN2 +5V"
label in7 "3VSB"
label in8 "VBat"
label fan1 "CPU Fan"
label fan2 "Case Fan"
label temp1 "CHIPSET Temp"
label temp2 "CPU1 Temp"
label temp3 "CPU2 Temp"
compute in1 (56/10+1)*@, @/(56/10+1)
compute in5 (20/10+1)*@, @/(20/10+1)
set in0_min 0.65*0.95
set in0_max 1.4*1.05
set in1_min 12*0.95
set in1_max 12*1.05
set in2_min 3.3*0.95
set in2_max 3.3*1.05
set in3_min 3.3*0.95
set in3_max 3.3*1.05
set in4_min 0
set in4_max 2.048
set in5_min 5*0.95
set in5_max 5*1.05
set in7_min 3.3*0.95
set in7_max 3.3*1.05
set in8_min 3*0.8
set in8_max 3*1.2
set temp1_max 50
set temp1_max_hyst 47
set temp2_max 85
set temp2_max_hyst 57
set temp3_max 85
set temp3_max_hyst 57
ignore in4
ignore fan3
##end of chip "w83667hg-*"
Code:
w83667hg-isa-0290
Adapter: ISA adapter
VCore: +1.13 V (min = +0.62 V, max = +1.47 V)
VIN0 +12V: +3.85 V (min = +11.40 V, max = +12.62 V) ALARM
AVCC: +3.44 V (min = +3.14 V, max = +3.47 V)
3VCC: +3.46 V (min = +3.14 V, max = +3.47 V)
VIN2 +5V: +3.36 V (min = +4.75 V, max = +5.26 V) ALARM
3VSB: +3.47 V (min = +3.14 V, max = +3.47 V)
VBat: +3.18 V (min = +2.40 V, max = +3.60 V)
Case Fan: 0 RPM (min = 0 RPM, div = 1)
CPU Fan: 0 RPM (min = 8823 RPM, div = 1)
CHIPSET Temp: +50.0°C (high = +50.0°C, hyst = +47.0°C) ALARM sensor = diode
CPU1 Temp: +49.0°C (high = +60.0°C, hyst = +57.0°C) sensor = diode
CPU2 Temp: +58.5°C (high = +60.0°C, hyst = +57.0°C) sensor = diode
cpu0_vid: +0.000 V
This information is based on this post found here
this code needs a bit more tweaking but it works accurately for both core temps...
Still todo
- Fix both fan accurate rpm reporting
- Possible control of fan speeds using this file
as none of the current work for me with this file nor without it...
Since I have no clew how to on that front maybe someone else can share...
If any of you guys found my, andyblac's and monty0815 post helpful pls rep up.