2011-07-27, 13:09
I followed the steps, all went fine, yet I get the same outputs as before (plus I lost the LAN card, so have to use wlan now), no improvement... xbmc wont start, and no opengl rendering
kaulalla Wrote:I followed the steps, all went fine, yet I get the same outputs as before (plus I lost the LAN card, so have to use wlan now), no improvement... xbmc wont start, and no opengl rendering
sudo dpkg -i fglrx*.deb
sudo aticonfig --initial -f
AND
sudo aticonfig --input=/etc/X11/xorg.conf --tls=1
Quote:# uninstall old
sudo sh /usr/share/ati/fglrx-uninstall.sh
sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx
#install new
cd ~/; mkdir catalyst11.7; cd catalyst11.7/
wget http://www2.ati.com/drivers/linux/ati-dr...x86_64.run
chmod +x ati-driver-installer-11-7-x86.x86_64.run
sudo sh ./ati-driver-installer-11-7-x86.x86_64.run --buildpkg Ubuntu/natty
sudo dpkg -i fglrx*.deb
sudo aticonfig --initial -f
# or maybe sudo aticonfig --input=/etc/X11/xorg.conf --tls=1 ?
sudo reboot
Anastrophe Wrote:Devil103,
I'm no linux guru and I don't have a Fusion box (yet), but surely the 'history' command would show you exactly what you typed?
sudo dpkg-reconfigure x11-common
This should bring up a screen in the terminal where you allow 'anybody' to startx
mbah.pande Wrote:Hi All
Just some question again on XBMC with this E350 APU
1. How to play Full HD video (1080p) in XBMC?
vainfo and fglrxinfo seems no problem but when i try to paly Full HD
video the image and sound is not smoth i mean have some delay
devil103 Wrote:You can always check if hardware acceleration is being used by pressing 'o' during playback. If CPU usage is high and there's no mention of 'vaapi' you're probably not using acceleration.
To give an idea, when playing 720p blurayrip my CPU usage is 10% - 15%
mbah.pande Wrote:yes it not using acceleration,
D(audio:aac, 44100 Hz, stereo, s16, 125kb/s) P(aq:53%, kB/s:118.13)
D(Video: H264, yuv420p, 1920x1080[PAR 1:! DAR 16:9] P9vq:99%, dc:ff-h264, Mb/s:2.39, drop:347, pc:1)
C( ad; 0.000, a/V: 3.932, edl:-, dcpu:1% acpu: 7% vcpu:98% )
W(fps:12.83 CPU0: 38,6% CPU1: 100.0% ) S( refres:60 missed:1750 speed:+0.277% sync:-22% error:23415)
Shame on me my video is only 720p
how to activated that accelerator?
1.) You didn't install the xvba package (unlikely if you followed the guide)
2.) The XvBA package is there but the link isn't right (see a few posts back, check to see if the link in /usr/lib/dri/fglrx_drv_video.so points to /usr/lib/va/drivers/fglrx_drv_video.so)
3.) Segmentation fault issue (search this topic to find which lines to append to /etc/environment)
<gputempcommand>aticonfig --odgt --adapter=0 | sed -ne 's/Sensor 0: Temperature - \([0-9]\+\).*/\1 C/p'</gputempcommand>
devil103 Wrote:Well, that's what this topic is for Probably one of three things:
Code:1.) You didn't install the xvba package (unlikely if you followed the guide)
2.) The XvBA package is there but the link isn't right (see a few posts back, check to see if the link in /usr/lib/dri/fglrx_drv_video.so points to /usr/lib/va/drivers/fglrx_drv_video.so)
3.) Segmentation fault issue (search this topic to find which lines to append to /etc/environment)
Otherwise, you can always check the ~/.xbmc/temp/xbmc.log file and see what errors it gives when starting playback.
devil103 Wrote:Well, that's what this topic is for Probably one of three things:
Code:1.) You didn't install the xvba package (unlikely if you followed the guide)
2.) The XvBA package is there but the link isn't right (see a few posts back, check to see if the link in /usr/lib/dri/fglrx_drv_video.so points to /usr/lib/va/drivers/fglrx_drv_video.so)
3.) Segmentation fault issue (search this topic to find which lines to append to /etc/environment)
Otherwise, you can always check the ~/.xbmc/temp/xbmc.log file and see what errors it gives when starting playback.