2005-07-19, 22:23
i just submitted this to http://www.xbmcscripts.com
'display' on the remote hides/shows pad when level timer is running.
'display' on the remote toggles pad size. (before 1st level starts)
(except when in config mode)
'x' on the control pad hides/shows pad when level timer is running.
'x' on the control pad toggles pad size. (before 1st level starts)
(except when in config mode)
'0' on the remote toggles autohide on/off.
'y' on the control pad toggles autohide on/off.
(lock in the upper left corner means autohide is disabled)
(it's set for 30 seconds in ptpadfile.xml
'title' on the remote switches to config mode. (before 1st level starts)
'white' on the control pad switches to config mode. (before 1st level starts)
while in config mode left/right selects field to edit.
up/down changes value.
you can manually edit ptcfgfile.py for more customization.
to set the number of levels in your tournament, you would set the next
level's ante to -1. (i.e. for 10 levels set level 11's ante to -1)
(there are 20 levels in the tournament if no ante is set to -1)
up/down/left/right repositions the pad except when in config mode. position
is saved on exit.
if the pad is hidden pause is disabled, pressing any key will show pad.
if you want music or a video playing, start them before you launch the script.
tip: if you have music or video(s) playing. make sure they're longer than the
tournament or you have repeat folders checked in system/settings.
tip: if you create your own event alarms, make sure they're longer than the
corresponding alarmtime + your crossfade setting.
cool animated slide in/out by: thanks to the skinners for the panel2.png:
enderw chokemaniac (lock.png)
thanks to phunck for the code used for reading the config files.
nuka1195
you need a build after july 4th
'display' on the remote hides/shows pad when level timer is running.
'display' on the remote toggles pad size. (before 1st level starts)
(except when in config mode)
'x' on the control pad hides/shows pad when level timer is running.
'x' on the control pad toggles pad size. (before 1st level starts)
(except when in config mode)
'0' on the remote toggles autohide on/off.
'y' on the control pad toggles autohide on/off.
(lock in the upper left corner means autohide is disabled)
(it's set for 30 seconds in ptpadfile.xml
'title' on the remote switches to config mode. (before 1st level starts)
'white' on the control pad switches to config mode. (before 1st level starts)
while in config mode left/right selects field to edit.
up/down changes value.
you can manually edit ptcfgfile.py for more customization.
to set the number of levels in your tournament, you would set the next
level's ante to -1. (i.e. for 10 levels set level 11's ante to -1)
(there are 20 levels in the tournament if no ante is set to -1)
up/down/left/right repositions the pad except when in config mode. position
is saved on exit.
if the pad is hidden pause is disabled, pressing any key will show pad.
if you want music or a video playing, start them before you launch the script.
tip: if you have music or video(s) playing. make sure they're longer than the
tournament or you have repeat folders checked in system/settings.
tip: if you create your own event alarms, make sure they're longer than the
corresponding alarmtime + your crossfade setting.
cool animated slide in/out by: thanks to the skinners for the panel2.png:
enderw chokemaniac (lock.png)
thanks to phunck for the code used for reading the config files.
nuka1195
you need a build after july 4th