2016-06-27, 15:08
Developer always say...No Debug Log no support....
(2016-06-27, 12:05)menno Wrote: When I connect a USB cd/dvd/Blu-ray player I cannot access it anywhere. The GUI doesnt add a DISC icon nor can I find the device through File Manager. Is this normal?This is not supported. Connect it while powered off and boot after it is plugged in.
LibreELECw:~ # dmesg | grep usb
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=UUID=e2d05cb3-52a7-4c13-811c-ff9918556efe disk=UUID=13b65e6b-74a7-4a65-910f-49359823f7b3 quiet
[ 0.592626] usbcore: registered new interface driver usbfs
[ 0.592639] usbcore: registered new interface driver hub
[ 0.592654] usbcore: registered new device driver usb
[ 0.745668] usbcore: registered new interface driver rtsx_usb
[ 0.758303] usbcore: registered new interface driver uas
[ 0.758330] usbcore: registered new interface driver usb-storage
[ 0.789318] usbcore: registered new interface driver usbhid
[ 0.789324] usbhid: USB HID core driver
[ 1.114939] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.246126] usb 1-4: string descriptor 0 read error: -22
[ 1.524888] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.699548] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1.699661] scsi host2: usb-storage 1-5:1.0
[ 3.281104] usbcore: registered new interface driver ath3k
[ 3.281579] usb 1-4: USB disconnect, device number 2
[ 3.284714] usbcore: registered new interface driver btusb
[ 3.591476] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 3.766957] usb 1-4: string descriptor 0 read error: -22
[ 18.606984] input: BD Remote Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/bluetooth/hci0/hci0:21/0005:054C:0306.0001/input/input14
LibreELECw:~ # lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13fd:084c Initio Corporation
Bus 001 Device 004: ID 13d3:3393 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
scsi host2: usb-storage 1-6:1.0
[13782.135792] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD SE-406AB TS00 PQ: 0 ANSI: 0
[13782.142033] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[13782.142512] sr 2:0:0:0: Attached scsi CD-ROM sr0
[13782.143150] sr 2:0:0:0: Attached scsi generic sg1 type 5
# uname -a
Linux LibreELEC 4.6.2 #1 SMP Mon Jun 27 22:06:15 BST 2016 x86_64 GNU/Linux
# lsb_release
LibreELEC (Milhouse) - Version: devel-20160627220448-#0627-gdf3c36b [Build #0627]
(2016-06-28, 00:45)csutcliff Wrote: Hi, would it be possible to have a choice of the 4.7 kernel again for the latest build(s)? It seemed to be much less prone to blank screens/wrong resolution output on my haswell nuc.
Thanks
(2016-06-28, 07:45)gjwAudio Wrote: So I went back through time - restoring previous builds - until the text was successfully displayed... and found myself back at #0611. This is the debug log from #0611 where I am able to see the Changelog info displayed for the CBC video addon.
(2016-06-13, 00:24)Milhouse Wrote:
- Build Details:
- [addons] move changelog to addon.xml (PR:9351, 1 commit, 9 files changed)
# uname -a
Linux LibreELEC 4.6.3 #1 SMP Tue Jun 28 21:06:43 BST 2016 x86_64 GNU/Linux
# lsb_release
LibreELEC (Milhouse) - Version: devel-20160628210522-#0628-gc008283 [Build #0628]