2014-07-04, 14:16
USEFUL website verified power adapters
http://elinux.org/RPi_VerifiedPeripheral...r_adapters
When the foundation layed out the template for settings, that was some time ago. With recent software improvements and more testing time. there should be a new setting. a good PSU has alot do with this but you can atleast give it ago. Also the needs of someone running raspbian are different to the needs of running XBMC. well here are my setting and you'll notice I used core as 550, but I bumped up the other GPU frequencies to play nicely. I have def noticed it abit snappier running core to 550 as apposed to 500. have a go and give your responnse. Also give your own Super Turbo settings
arm_freq=1100
core_freq=550
h264_freq=275
isp_freq=1
v3d_freq=275
sdram_freq=600
over_voltage_sdram=4
over_voltage=8
disable_pvt=1
initial_turbo=60
hdmi_ignore_cec=1
force_turbo=1
Also popcornmix can you answer this question please. From testing there is def a limit to core=600 (any further and it defaults it to 500) but is there a limit to sdram? and if so what is it?
I have run it at 705 successfully (with sdram overvoltage at 8) and it worked but I have no way of testing if that is the speed it is actually running thanks
http://elinux.org/RPi_VerifiedPeripheral...r_adapters
When the foundation layed out the template for settings, that was some time ago. With recent software improvements and more testing time. there should be a new setting. a good PSU has alot do with this but you can atleast give it ago. Also the needs of someone running raspbian are different to the needs of running XBMC. well here are my setting and you'll notice I used core as 550, but I bumped up the other GPU frequencies to play nicely. I have def noticed it abit snappier running core to 550 as apposed to 500. have a go and give your responnse. Also give your own Super Turbo settings
arm_freq=1100
core_freq=550
h264_freq=275
isp_freq=1
v3d_freq=275
sdram_freq=600
over_voltage_sdram=4
over_voltage=8
disable_pvt=1
initial_turbo=60
hdmi_ignore_cec=1
force_turbo=1
Also popcornmix can you answer this question please. From testing there is def a limit to core=600 (any further and it defaults it to 500) but is there a limit to sdram? and if so what is it?
I have run it at 705 successfully (with sdram overvoltage at 8) and it worked but I have no way of testing if that is the speed it is actually running thanks
