2014-12-20, 22:20
Raspberry pi B+
Aluminium heat disipators
Acrylic enclosure
5V 20x20 fan, running at 3.3V (for noise)
Openelec 4.97.2
Pi is powered via USB port from a Memup ZX HD Multimedia HDD (one port for power, other one as storage)
My configuration file:
gpu_mem=128
gpu_mem_256=128
gpu_mem_512=256
arm_freq=1100
core_freq=550
sdram_freq=600
force_turbo=0
initial_turbo=0
overscan_scale=0
disable_overscan=1
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
hdmi_force_hotplug=1
hdmi_ignore_cec_init=1
hdmi_drive=2
hdmi_force_edid_audio=0
hdmi_pixel_encoding=0
hdmi_ignore_hotplug=0
sdtv_mode=2
sdtv_aspect=1
hdmi_ignore_cec=1
disable_splash=1
over_voltage_sdram=4
max_usb_current=0
over_voltage=8
With this configuration, playing full hd files:
Max temperature is 38,5ºC (more or less).
On skin (confluence), 34ºC.
Room temperature is about 21ºC, but pi is inside a furniture, so maybe is more.
Before those new parameters I use Turbo, and temperature was 31ºC at iddle and 34ºC playing full HD
The confluence skin is noticeably more responsive, and also, other skins now go faster. Now I can use a keyboard arrows without delay.
Very happy with these settings
All settings were done by Openelec RPi Config addon
Aluminium heat disipators
Acrylic enclosure
5V 20x20 fan, running at 3.3V (for noise)
Openelec 4.97.2
Pi is powered via USB port from a Memup ZX HD Multimedia HDD (one port for power, other one as storage)
My configuration file:
gpu_mem=128
gpu_mem_256=128
gpu_mem_512=256
arm_freq=1100
core_freq=550
sdram_freq=600
force_turbo=0
initial_turbo=0
overscan_scale=0
disable_overscan=1
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
hdmi_force_hotplug=1
hdmi_ignore_cec_init=1
hdmi_drive=2
hdmi_force_edid_audio=0
hdmi_pixel_encoding=0
hdmi_ignore_hotplug=0
sdtv_mode=2
sdtv_aspect=1
hdmi_ignore_cec=1
disable_splash=1
over_voltage_sdram=4
max_usb_current=0
over_voltage=8
With this configuration, playing full hd files:
Max temperature is 38,5ºC (more or less).
On skin (confluence), 34ºC.
Room temperature is about 21ºC, but pi is inside a furniture, so maybe is more.
Before those new parameters I use Turbo, and temperature was 31ºC at iddle and 34ºC playing full HD
The confluence skin is noticeably more responsive, and also, other skins now go faster. Now I can use a keyboard arrows without delay.
Very happy with these settings
All settings were done by Openelec RPi Config addon