[robello84]

Ok sorry

@robello84: I've no idea what you are doing, or what you have done. Start a new thread, don't discuss it here as it's completely OT. Include your complete build log (use a paste site).

[popcornmix]

Tried this last night as one of my 2 RPi2 devices is hooked to an older TV without HDMI. The audio did strange things with pitch/speed. I tried with both PLL adjustments on and off and in both cases the audio pitch/speed was all over the place (sounded like a whammy bar). For now, I've gone back to the previous audio configuration.

I tested a few files and didn't see this effect. Can you post a sample file that does behave badly?

[herrmeier01]

Does someone knows where is the new config file for persistent alsa configuration?

amixer cset numid=3 1
amixer cset numid=3 80%

alsactl -f /storage/.config/sound.conf store

This does not work anymore...

[zaphod24]

Tried this last night as one of my 2 RPi2 devices is hooked to an older TV without HDMI. The audio did strange things with pitch/speed. I tried with both PLL adjustments on and off and in both cases the audio pitch/speed was all over the place (sounded like a whammy bar). For now, I've gone back to the previous audio configuration.

I tested a few files and didn't see this effect. Can you post a sample file that does behave badly?

Sure, I'll try to put one together tonight. It happened for me watching live TV, 1080i MPEG2. Perhaps this sample I uploaded a while back will do the same:

https://drive.google.com/file/d/0B8TU_Cp...sp=sharing

[nb2a]

So far latest build to me 216 live TV is quite unreliable HD near impossible to use suffering from freezes. SD much more reliable. I use the HD home run pvr as well. Watching videos from other addons and streams such as Quasar seem fine. Thanks again for all the great work on this.

[popcornmix]

So far latest build to me 216 live TV is quite unreliable HD near impossible to use suffering from freezes. SD much more reliable. I use the HD home run pvr as well.

Can you be very clear if this is a new issue with this buid (that wasn't in yesterday's build) or if it has always been a problem?
If it used to be better then identifying the last good build is very important.

[doldi]

Hi,

in principle DTS/DD5.1 works now good in #0216, even though i must reset my HDMI-splitter to get the corret multichannel.
There are no problems with other devices on this eightfold HDMI-splitter and on old Jarvis build it works perfekt.

Next problem we have with chapter skip in DVDs - skip goes to the next DVD in a list and not to the next chapter in the playing DVD.

Thank you for your attention
Harald

[herrmeier01]

Here #0216 just runs amazing with VDR Live-TV.
Channel zapping is always maximum 2s with H.264/MPEG-4 720p and 1080i, scrambled or not.
Just an issue with live preview with 1080i channels in channel list together with Hyperion. I think in earlier versions this wasn't present.

[nb2a]

This is only my third build I have tested.It has been the case with the last two HD home pvr working builds builds to make the point. Hope that helps.

So far latest build to me 216 live TV is quite unreliable HD near impossible to use suffering from freezes. SD much more reliable. I use the HD home run pvr as well.

Can you be very clear if this is a new issue with this buid (that wasn't in yesterday's build) or if it has always been a problem?
If it used to be better then identifying the last good build is very important.

[Milhouse]

New OpenELEC Krypton build #0217: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.4.1 #1 Wed Feb 17 21:05:13 GMT 2016 armv6l GNU/Linux

# vcgencmd version
Feb 15 2016 23:42:10
Copyright (c) 2012 Broadcom
version 263c9ef2f99450604d945968d75c013abf1fc841 (clean) (release)

# lsb_release
OpenELEC (Milhouse) - Version: devel-20160217210420-#0217-gcefd274 [Build #0217]

# vcdbg log msg 2>&1 | grep DTOK
001745.666: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of OpenELEC master (cefd274c, changelog) and tip of XBMC master (c58fd4e5, changelog) with the following modifications:

• Includes newclock5 patches
  
• Excludes the OpenELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.4.y
  
• Default setting for "Show RSS Feed" changed to disabled (new installs only) [patch details]
  
• Disabled "Total Duration" in Confluence (see build #0221 for details)
  
• Includes latest bcm2835-driver master (fa931b46, ahead +18)
  
• Includes latest dcadec master (0e074384, ahead +139)
  
• Includes latest kodi-platform master (92583ef9, ahead +2)
  
• Includes latest libcec master (6d68d212)
  
• Includes latest libnfs master (2927ce04, ahead +9)
  
• Includes latest p8-platform master (38343e0a)
  
• Includes latest addons: peripheral.joystick (fc605f4b, +46), pvr.argustv (bceff5ad, +15), pvr.demo (116a172a, +13), pvr.filmon (2a25d081, +17), pvr.hdhomerun (020592bc, +17), pvr.hts (0814da42, +53), pvr.iptvsimple (5ee3a53d, +15), pvr.mediaportal.tvserver (f146bc74, +39), pvr.mythtv (1b43b5f4, +17), pvr.nextpvr (a4019fa7, +16), pvr.njoy (4f30f4af, +12), pvr.pctv (fd600ba4, +15), pvr.stalker (a74fc3e3, +14), pvr.vbox (b0916449, +21), pvr.vdr.vnsi (2089549a, +17), pvr.vuplus (4cf6ad02, +14), pvr.wmc (9a83292f, +17)
  
• Includes commits from service.openelec.settings/, ahead +1 (OpenELEC)
  
• Include [env] e7cbe9cb: xf86-video-intel: explicitely disable TearFree and TripleBuffer
  
• Include [env] ed774729: Intel: Implement Passthrough-Range
  
• Include [env] 2f83a1cf: xf86-video-intel: bump to 8b8c9a36 (fixes segfault when refreshrate changing)
  
• Include [env] 3a6268c9: VAAPI: Enable EGL
  
• Include [env] 98c65e6a: Kodi: Use Limited Range by default
  
• Include [env] 858f6461: xf86-video-intel: bump to 371219c
  
• Include [env] compare: ffmpeg: Additional Jarvis 2.8.x patches
  
• Include [env] patch: Clean Kodi view cache on startup
  
• Include [env] patch: Enable other binary addons
  
• Include [env] patch: Add experimental splash video
  
• Include [env] patch: Enable pvr addons, disable pvr updates
  
• Include [env] patch: kodi: peripheral.joystick binary addon
  
• Include [env] PR:4500: kodi: update to 17.0
  
• Include [env] PR:4537: [scripts] Add PKG_SOURCE_NAME for non-standard package tarballs
  
• Include [env] PR:4661: stripping changes
  
• Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
  
• Include [pkg] PR:7030: CNetwork - implement IPv6
  
• Include [pkg] PR:8254: FIX: Only handle 3D bitmap subs in TAB
  
• Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
  
• Include [pkg] PR:8807: Controller input
  
• Include [pkg] PR:8822: Implement ignore url options in CFileItemList
  
• Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
  
• Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
  
• Include [pkg] PR:9112: [confluence] [PVR] small adjustments
  
• Include [pkg] PR:9148: [EPG] Guide window: Fixed and optimized restoration of selected item after grid update
  

Build Highlights:

1. mmal fixes
   

Build Details:

1. OpenELEC:
   • bcm_sta: add patches for bugs and 4.3+ kernels (PR:4714, 1 commit, 4 files changed)
     
2. newclock5:
   • New commits in this build:
     • mmal: increase decode buffering a little to help harder MVC files (46e1a68d)
       
     • fixup: disable thread_safe_callbacks (b7256ec9)
       
     • mmal: Use correct pool destroy functions (ada9f083)
       
   • Commits no longer in build:
     • Revert "temp: Add lock around mmal and omx calls to avoid stalled audio issue" (ff3835a6)
       
     • temp: mmal: increase decode buffering a little to help harder MVC files (b7f89717)
       
3. kernel 4.4.y:
   • New commits in this build:
     • dcw_otg: Make trimming messages less noisy (81d8a707)
       
4. Additional commits/pull requests/changes not yet merged upstream:
   • Added: [pkg] PR:9148: [EPG] Guide window: Fixed and optimized restoration of selected item after grid update
     

[zaphod24]

Tried this last night as one of my 2 RPi2 devices is hooked to an older TV without HDMI. The audio did strange things with pitch/speed. I tried with both PLL adjustments on and off and in both cases the audio pitch/speed was all over the place (sounded like a whammy bar). For now, I've gone back to the previous audio configuration.

I tested a few files and didn't see this effect. Can you post a sample file that does behave badly?

Sure, I'll try to put one together tonight. It happened for me watching live TV, 1080i MPEG2. Perhaps this sample I uploaded a while back will do the same:

https://drive.google.com/file/d/0B8TU_Cp...sp=sharing

Tonight it is just popping/clicking periodically and not changing pitch/speed. Here is a small sample:

https://drive.google.com/file/d/0B8TU_Cp...sp=sharing

Turning the new audio back off results in no clicks.

[da-anda]

Wow, just wow. Kudos to everybody involved. Out of curiosity I did a 1080p h265 encode the other day and tested it with #0216 on my PI2 which is not(!) overclocked and I'm pretty amazed. I didn't watch the entire movie but only skipped through it to test scenes with various complexity and to my surprise it played just fine. While I'm sure there will be issues if I watched the entire movie, this is still more than impressive. Great work guys.

[polo_joe]

I have some buffering issues with latest builds at the beginning when watching livetv channels
http://sprunge.us/QUjD

Can you disable adjust PLL in settings and see if that helps?

same problem with latest builds

[nb2a]

[quote='polo_joe' pid='2241480' dateline='1455128950']
I have some buffering issues with latest builds at the beginning when watching livetv channels
http://sprunge.us/QUjD

Can you disable adjust PLL in settings and see if that helps?

same problem with latest builds

Cannot get HD to buffer on live TV at all after startup
Using HD home run PVR
Only been finding this in the last three builds with this working PVR

[Meiden]

Hi, @Milhouse, I've got a question for you. Is it possible to compile an OE 6.0.1 build but adding the new firmware changes? Could you tell me how?