Login at Kodi Home

C-Quel · 2016-07-30, 18:47

(2016-07-30, 17:38)Guilouz Wrote: What's happen with last build ? Since update #726 to #729 button 'OK' and 'Back' not working with my remote.

I have this remote : https://www.amazon.com/Ortek-Windows-Inf...ter+Remote

I think they are aware of it... might need to extract a build and drop it in your update folder and power cycle your device to revert back if you cannot use any form of input device

I have the same problem here but as i use yatse i can do without the select button for now... but might need to do the above to force a new update ;-) when its released

Milhouse · 2016-07-30, 19:20

#0729 includes a merge that breaks a lot of remote controls - it's been reverted so tonight's #0730 build should be good. There's also a fix for auto-repeat in tonight's build, so should be good (as long as nothing bad is merged between now and the build...)

C-Quel · 2016-07-30, 19:25

(2016-07-30, 19:20)Milhouse Wrote: #0729 includes a merge that breaks a lot of remote controls - it's been reverted so tonight's #0730 build should be good. There's also a fix for auto-repeat in tonight's build, so should be good (as long as nothing bad is merged between now and the build...)

Quick question... any idea if usb keyboards are working still? might save a few users a bit of a headache Smile

Milhouse · 2016-07-30, 20:49

I'm not aware of any specific problems with keyboards. Keyboards weren't broken by the merge in #0729 (though they did receive some new longpress mappings which haven't been reverted) and a USB keyboard connected to a NUC is working fine with a test build from earlier today.

Milhouse · (This post was last modified: 2016-07-31, 19:22 by Milhouse.)

New LibreELEC.tv Krypton build #0730: Generic
(Supercedes previous build)

Code:
# uname -a

Linux NUC 4.7.0 #1 SMP Sat Jul 30 21:07:13 BST 2016 x86_64 GNU/Linux

# lsb_release

LibreELEC (Milhouse) - Version: devel-20160730210516-#0730-g0bc2994 [Build #0730]

Based on tip of LibreELEC.tv master (0bc29942, changelog) and tip of XBMC master (4dd11c33, changelog) with the following modifications:

Includes FernetMenta "VideoPlayer" patches
Includes latest kodi-platform master (c8188d82)
Includes latest libcec master (6d68d212)
Includes latest libnfs master (fac3a954, ahead +34)
Includes latest p8-platform master (041a8c6c, ahead +1)
Includes latest addons: inputstream.mpd (51271e1a, +23), inputstream.rtmp (7bf2298e), inputstream.smoothstream (99e77711, +4), peripheral.joystick (6090a90e, +1), pvr.argustv (e536f32e), pvr.demo (01c68c88), pvr.dvblink (20e1ccb4, +2), pvr.dvbviewer (7a7ead36, +1), pvr.filmon (efd379b8), pvr.hdhomerun (a71e816d), pvr.hts (66dcb89f, +2), pvr.iptvsimple (21e91a5f, +1), pvr.mediaportal.tvserver (72452b9d, +2), pvr.mythtv (d10d210b, +8), pvr.nextpvr (32b3c2ff, +2), pvr.njoy (b5d65655), pvr.pctv (12d8baf1), pvr.stalker (b6cb9b87, +9), pvr.vbox (f38f82f0, +2), pvr.vdr.vnsi (8515b4bf, +6), pvr.vuplus (4f2ad621, +2), pvr.wmc (979c37db, +2)
Includes commits from xbmc/master, ahead +8 (FernetMenta)
Include [env] patch: Add kodi binary addons (pvr, adsp, other)
Include [env] patch: Don't build ADSP addons
Include [env] patch: kodi-theme-Estuary: No more png in root
Include [env] patch: kodi: Revert cache clearing - replaced by PR9225
Include [env] patch: Bump included addon versions to prevent online updates
Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.*, os.* and peripheral.*
Include [env] patch: Add experimental splash video for RPi
Include [env] patch: ffmpeg: bump 3.1.1
Include [env] PR:481: linux: Update to 4.7 (WIP)
Include [env] PR:535: init: Add upgrade check to avoid incompatible upgrades [RFC,WIP]
Include [env] PR:573: kodi/Intel: Various improvements from fritsch
Revert [env] 46b9b7b3: rtmpdump (Reason: use newclock5 bump)
Include [pkg] 441217d8: logging: Add microsecond timer to log messages (kodi)
Include [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)
Include [pkg] PR:171: fix seeklabel (kodi-theme-Estuary)
Include [pkg] PR:8645: [video] Add season/TV show artwork to episodes/seasons even if they have their own fanart.
Include [pkg] PR:8824: videodb: fix smart playlists not honoring "Show empty TV shows" setting.
Include [pkg] PR:8922: [guiinfo] extend ranges for listitem properties
Include [pkg] PR:10157: [WIP] Double the backslash in mysql in case we're in 'LIKE'

Build Highlights:

Fix remote control buttons broken in build #0729
Fix for remote control autorepeat (updated PR:481)
Estuary: Various updates including screenshot previews
Replace "CodecInfo" button/key mapping with "PlayerDebug" (you may need to adjust this in any custom keymaps)

Build Details:

LibreELEC.tv:
- installer: fix typo for update/fs-resize (PR:581, 1 commit, 1 file changed)
XBMC:
- [estuary] skin sync 0.8.4 (PR:10185, 1 commit, 96 files changed)
- Remove all long-press actions from remote.xml (PR:10186, 1 commit, 1 file changed)
- [droid] - cleanup binary addon handling (PR:10172, 2 commits, 13 files changed)
- Readd Player process info and PVR info dialog (PR:10166, 5 commits, 21 files changed)
- [EPG] Fix and simplify epg entry update. (PR:10187, 1 commit, 2 files changed)
- [skin.estouchy] update (PR:10191, 1 commit, 4 files changed)
- [estuary] skin sync pt II (PR:10189, 2 commits, 5 files changed)
- [cleanup] remove unused leftovers from settings removals (PR:10184, 2 commits, 5 files changed)
- [estuary] fix typo in mypics.xml (PR:10196, 1 commit, 1 file changed)
xbmc/master (FernetMenta):
- New commits in this build:
  - AE: refactor resample buffers (2bcc53ac)
  - AE: add ffmpeg atempo filter (4e91b693)
  - VideoPlayer: improve rr related to clockspeed (58148e28)
  - rename codecinfo to playerdebug, fix codec info for pictures (6a31769e)
  - VideoPlayer: move ACTION_PLAYER_PROCESS_INFO from application to player (872c58cc)
  - rename remaining kaymap action CodecInfo to PlayerProcessInfo (dc371ed9)
Additional commits/pull requests/changes not yet merged upstream:
- Added: [env] patch: kodi-theme-Estuary: No more png in root
- Updated: [pkg] patch: [skin.estuary] Hide watched items on home (kodi-theme-Estuary)

tinzarian · (This post was last modified: 2016-07-30, 23:31 by tinzarian.)

(2016-07-30, 22:45)Milhouse Wrote: Build Highlights:

Fix for remote control autorepeat (updated PR:481)

I had hoped this would fix the IR-power on issue as well. Unfortunately it doesn't.

piotrasd · 2016-07-30, 23:34

(2016-07-30, 20:49)Milhouse Wrote: I'm not aware of any specific problems with keyboards. Keyboards weren't broken by the merge in #0729 (though they did receive some new longpress mappings which haven't been reverted) and a USB keyboard connected to a NUC is working fine with a test build from earlier today.

this same problem with PS3 remote connected over BT.
and i checked IRW and eventinput and system showing presed key OK or ENTER but notthing happen in kodi

And yes keyboard working fine !

Milhouse · (This post was last modified: 2016-07-31, 00:12 by Milhouse.)

(2016-07-30, 23:30)tinzarian Wrote: I had hoped this would fix the IR-power on issue as well. Unfortunately it doesn't.

You said your restart problem started with #0420, and provided this crashlog:

(2016-05-11, 21:41)tinzarian Wrote:
(2016-05-10, 22:59)tinzarian Wrote: I have a Zotac Zbox CI520, which was running the #0419 build. After I installed the #0503 something is f'ed up with the power and or IR-settings. After a shutdown it won't power up with the remote, I have to do it manually.

Rolling back to 419 solves it, so this broke with some build in between.

Edit: Build #0420 is the last one that worked, it's still broken in #0509

@Milhouse:
Just to be sure I created a log with the latest (0510): http://sprunge.us/ABZb
and noticed on shutdown a crashlog was created: http://sprunge.us/JRBe

So something is causing the system to crash at shutdown ...

There's nothing obvious in build #0420 that would appear to be responsible for changing the restart behaviour (no new kernel, no new drivers etc.). The crash in your crashlog appears to be related to libnfs, but libnfs didn't change in #0420 so I'm not sure why it would start to become an issue (there is a change in #0420 that cleans up some file handling code but it looks fairly benign).

Are you sure this restart problem began with #0420, and that it wasn't just a random/unrelated crash that made you think it starts with #0420, when in fact it's a later build that has the real problem?

C-Quel · 2016-07-31, 00:13

Liking #0730 a lot! Seems a lot of my little Live TV glitches have settled... many thanks Milhouse & Co.

Milhouse · 2016-07-31, 00:15

(2016-07-30, 23:34)piotrasd Wrote:
(2016-07-30, 20:49)Milhouse Wrote: I'm not aware of any specific problems with keyboards. Keyboards weren't broken by the merge in #0729 (though they did receive some new longpress mappings which haven't been reverted) and a USB keyboard connected to a NUC is working fine with a test build from earlier today.

this same problem with PS3 remote connected over BT.
and i checked IRW and eventinput and system showing presed key OK or ENTER but notthing happen in kodi

And yes keyboard working fine !

Apologies if you've told me this already, but when did the PS3 BT remote last work properly (ie. which build)?

Matt Devo · 2016-07-31, 02:32

(2016-07-31, 00:15)Milhouse Wrote:
(2016-07-30, 23:34)piotrasd Wrote:
(2016-07-30, 20:49)Milhouse Wrote: I'm not aware of any specific problems with keyboards. Keyboards weren't broken by the merge in #0729 (though they did receive some new longpress mappings which haven't been reverted) and a USB keyboard connected to a NUC is working fine with a test build from earlier today.

this same problem with PS3 remote connected over BT.
and i checked IRW and eventinput and system showing presed key OK or ENTER but notthing happen in kodi

And yes keyboard working fine !

Apologies if you've told me this already, but when did the PS3 BT remote last work properly (ie. which build)?

PS3 BT remote working fine here on #0730, HSW Chromebox

sciascia88 · 2016-07-31, 04:32

@Milhouse
Here's my Debug Log from the current build. The VPN manager acts as if it connects to the New York server, but actually does not. It works fine on the Alpha build (7.90.003).

Hope that helps.

madhits · 2016-07-31, 05:18

Milhouse Would it be possible to add support for Silicone image 680 PATA IDE controller to LibreElec? See here: http://lxr.free-electrons.com/source/dri...680.c#L421

I have been trying to figure it out myself and I am completly unable to compile the kernal to add the support. I am just to damn new to linux to figure out the errors I keep getting.

I hope you can help me, your pretty much my only hope now..

Milhouse · 2016-07-31, 06:10

(2016-07-31, 04:32)sciascia88 Wrote: @Milhouse
Here's my Debug Log from the current build. The VPN manager acts as if it connects to the New York server, but actually does not. It works fine on the Alpha build (7.90.003).

Hope that helps.

If you were able to identify the last working build that would help towards a solution.

Although to be honest a quick look at your logs (dmesg/journalctl) shows OpenVPN is likely to be the least of your problems as it appears you're suffering from a serious hardware problem with your /dev/sda hard disk - it might be on it's last legs:

Code:
Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x280100 action 0x6 frozen

Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error

Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:08:00:70:04/02:00:00:00:00/40 tag 1 ncq 262144 in

                                           res 40/00:08:00:70:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

Jul 30 22:03:15 LibreELEC kernel: ata1: hard resetting link

Jul 30 22:03:15 LibreELEC kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

Jul 30 22:03:15 LibreELEC kernel: ata1.00: configured for UDMA/133

Jul 30 22:03:15 LibreELEC kernel: ata1: EH complete

Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x30000 SErr 0x280100 action 0x6 frozen

Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error

Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:80:00:7b:04/01:00:00:00:00/40 tag 16 ncq 131072 in

                                           res 40/00:80:00:7b:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:88:00:7c:04/01:00:00:00:00/40 tag 17 ncq 131072 in

                                           res 40/00:80:00:7b:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

Jul 30 22:03:15 LibreELEC kernel: ata1: hard resetting link

Jul 30 22:03:15 LibreELEC kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

Jul 30 22:03:15 LibreELEC kernel: ata1.00: configured for UDMA/133

Jul 30 22:03:15 LibreELEC kernel: ata1: EH complete

Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x300 SErr 0x280100 action 0x6 frozen

Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error

Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:40:00:b8:04/01:00:00:00:00/40 tag 8 ncq 131072 in

                                           res 40/00:40:00:b8:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:48:00:b9:04/01:00:00:00:00/40 tag 9 ncq 131072 in

                                           res 40/00:40:00:b8:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

I do see you've managed to bring up the tun interface and from the #0730 kodi.log it looks like it's connecting to New York:

Code:
22:07:12 252.597366 T:140221614122752   DEBUG: VPN Mgr : Connecting using profile US New York City (UDP).

22:07:12 252.610611 T:140221614122752   DEBUG: VPN Mgr : (Linux) Starting VPN with /usr/sbin/openvpn "/storage/.kodi/addons/service.vpn.manager/PIA/US New York City (UDP).ovpn" > /run/openvpn.log &

...

22:07:14 254.672470 T:140221614122752   DEBUG: VPN Mgr : Reading log file

...

22:07:16 256.678101 T:140221614122752   DEBUG: VPN Mgr : Reading log file

22:07:16 256.680969 T:140221614122752   DEBUG: VPN Mgr : VPN connection status is 1

22:07:16 256.684662 T:140221614122752   DEBUG: VPN Mgr : Getting IP info from IP-API

22:07:17 257.311218 T:140221614122752  NOTICE: Previous line repeats 1 times.

22:07:17 257.311279 T:140221614122752  NOTICE: VPN Mgr : (common.py) Connected to a VPN in Pennsylvania, United States.

                                            Using profile US New York City (UDP).

                                            External IP address is 67.xxx.xxx.xxx.

                                            Service Provider is Comcast Cable.

22:07:17 257.375153 T:140221614122752   DEBUG: VPN Mgr : Update service requested

22:07:17 257.382080 T:140221614122752   DEBUG: VPN Mgr : Requesting service restarts

22:07:17 258.008118 T:140221874165504   DEBUG: VPN Mgr : Service received a start request

If you're having problems, look in the OpenVPN log: /run/openvpn.log

Though to be honest I'm not an OpenVPN expert, and given your hardware problems I'd suggest fixing that first. Then, if the VPN problem continues, determine the last working Milhouse test build. Comparing these test builds with 7.90.003 doesn't really tell me much, other than OpenVPN worked in a build with a Kodi version from 4 weeks ago, a totally different kernel and a whole bunch of packages that haven't been bumped in the last few weeks, so if you can tell me which of my builds is the last working version that would help a lot.

sciascia88 · (This post was last modified: 2016-07-31, 06:28 by sciascia88.)

(2016-07-31, 06:10)Milhouse Wrote:
(2016-07-31, 04:32)sciascia88 Wrote: @Milhouse
Here's my Debug Log from the current build. The VPN manager acts as if it connects to the New York server, but actually does not. It works fine on the Alpha build (7.90.003).

Hope that helps.

If you were able to identify the last working build that would help towards a solution.

Although to be honest a quick look at your logs (dmesg/journalctl) shows OpenVPN is likely to be the least of your problems as it appears you're suffering from a serious hardware problem with your /dev/sda hard disk - it might be on it's last legs:

Code:
Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x280100 action 0x6 frozen Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:08:00:70:04/02:00:00:00:00/40 tag 1 ncq 262144 in res 40/00:08:00:70:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Jul 30 22:03:15 LibreELEC kernel: ata1: hard resetting link Jul 30 22:03:15 LibreELEC kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 30 22:03:15 LibreELEC kernel: ata1.00: configured for UDMA/133 Jul 30 22:03:15 LibreELEC kernel: ata1: EH complete Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x30000 SErr 0x280100 action 0x6 frozen Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:80:00:7b:04/01:00:00:00:00/40 tag 16 ncq 131072 in res 40/00:80:00:7b:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:88:00:7c:04/01:00:00:00:00/40 tag 17 ncq 131072 in res 40/00:80:00:7b:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Jul 30 22:03:15 LibreELEC kernel: ata1: hard resetting link Jul 30 22:03:15 LibreELEC kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 30 22:03:15 LibreELEC kernel: ata1.00: configured for UDMA/133 Jul 30 22:03:15 LibreELEC kernel: ata1: EH complete Jul 30 22:03:15 LibreELEC kernel: ata1.00: exception Emask 0x10 SAct 0x300 SErr 0x280100 action 0x6 frozen Jul 30 22:03:15 LibreELEC kernel: ata1.00: irq_stat 0x08000000, interface fatal error Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:40:00:b8:04/01:00:00:00:00/40 tag 8 ncq 131072 in res 40/00:40:00:b8:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Jul 30 22:03:15 LibreELEC kernel: ata1.00: cmd 60/00:48:00:b9:04/01:00:00:00:00/40 tag 9 ncq 131072 in res 40/00:40:00:b8:04/00:00:00:00:00/40 Emask 0x10 (ATA bus error)

I do see you've managed to bring up the tun interface and from the #0730 kodi.log it looks like it's connecting to New York:

Code:
22:07:12 252.597366 T:140221614122752 DEBUG: VPN Mgr : Connecting using profile US New York City (UDP). 22:07:12 252.610611 T:140221614122752 DEBUG: VPN Mgr : (Linux) Starting VPN with /usr/sbin/openvpn "/storage/.kodi/addons/service.vpn.manager/PIA/US New York City (UDP).ovpn" > /run/openvpn.log & ... 22:07:14 254.672470 T:140221614122752 DEBUG: VPN Mgr : Reading log file ... 22:07:16 256.678101 T:140221614122752 DEBUG: VPN Mgr : Reading log file 22:07:16 256.680969 T:140221614122752 DEBUG: VPN Mgr : VPN connection status is 1 22:07:16 256.684662 T:140221614122752 DEBUG: VPN Mgr : Getting IP info from IP-API 22:07:17 257.311218 T:140221614122752 NOTICE: Previous line repeats 1 times. 22:07:17 257.311279 T:140221614122752 NOTICE: VPN Mgr : (common.py) Connected to a VPN in Pennsylvania, United States. Using profile US New York City (UDP). External IP address is 67.xxx.xxx.xxx. Service Provider is Comcast Cable. 22:07:17 257.375153 T:140221614122752 DEBUG: VPN Mgr : Update service requested 22:07:17 257.382080 T:140221614122752 DEBUG: VPN Mgr : Requesting service restarts 22:07:17 258.008118 T:140221874165504 DEBUG: VPN Mgr : Service received a start request

If you're having problems, look in the OpenVPN log: /run/openvpn.log

Though to be honest I'm not an OpenVPN expert, and given your hardware problems I'd suggest fixing that first. Then, if the VPN problem continues, determine the last working Milhouse test build. Comparing these test builds with 7.90.003 doesn't really tell me much, other than OpenVPN worked in a build with a Kodi version from 4 weeks ago, a totally different kernel and a whole bunch of packages that haven't been bumped in the last few weeks, so if you can tell me which of my builds is the last working version that would help a lot.

Alright, when I get more time to test different builds I'll send the logs. The VPN manager does go through the motions and says it is connected to NY, but that IP is my actual IP, not the one it should show from NY. The OpenVPN log says "ERROR: Linux route add command failed: external program exited with error status: 2" four times before completing the sequence, but I have no idea what that even really means and the developer seemed to not have much insight either.

Thanks for pointing out the hard drive errors too. It's the OS drive and I had a feeling that it wasn't healthy.