[sunbuterr]

¿does anyone know how to run the 384 khz or 192 khz using Kodi 15.2 under Raspbian Jessie?

because only displayed on the i-sabre screen 96kHz, while listening to a 384kHz,192 kHz, 176 kHz Flac audio file.
also only the 96kHz led is on under Allo kali reclocker

components:

AUDIOPHONICS DAC I-SABRE ES9028Q2M KALI EDITION
ALLO KALI RECLOCKER I2S FIFO
RASPBERRY PI 3

in the file config i have the line dtoverlay=hifiberry-dac

[DaVu]

Maybe i´m completely wrong, but why do you use a DTOverlay for a device you don´t own?

You don´t use the Hifiberry DAC and would doubt a little bit, that those DACs are compatible to each other

[popcornmix]

Be aware the kali reclocker delays audio and so probably isn't useful for video playback (see here).

[sunbuterr]

Maybe i´m completely wrong, but why do you use a DTOverlay for a device you don´t own?

You don´t use the Hifiberry DAC and would doubt a little bit, that those DACs are compatible to each other

The problem is that the kernel does not have drivers for this DAC, so in order to make it work I have to use one that is compatible, although it does not work as it would have to be, in Dietpi, Picoreplayer and other similar works.

[sunbuterr]

well, i fixed now. just used the Kernel from DietPi 4.9.52-v7+ http://dietpi.com/downloads/binaries/rpi...el_4.9.zip  and the i-sabre drive http://dietpi.com/downloads/binaries/rpi...naries.zip from same site.

now works 352.8 Khz on Kodi 15.2 and Debian 8 (jessie) ( or whatever you use )

for check on command the actual info of hardware of dac play

Code:

cat /proc/asound/card*/pcm0p/sub0/hw_params

command used:

Code:

sudo apt-mark hold raspberrypi-bootloader raspberrypi-kernel libraspberrypi-bin
wget http://dietpi.com/downloads/binaries/rpi/dietpi_rpi_kernel_4.9.zip -O package.zip
sudo 7z x -aoa package.zip -o/
rm package.7z

Code:

wget http://dietpi.com/downloads/binaries/rpi/I-Sabre-K2M_binaries.zip -O package.zip
sudo unzip -o package.zip -d /
rm package.7z
depmod -a

code added on boot/config.txt

Code:

dtoverlay=i-sabre-k2m
dtparam=i2c_arm=on