2015-11-10, 02:31
2015-11-10, 08:11
(2015-11-10, 01:32)mule1 Wrote:(2015-11-09, 09:09)Caramba69 Wrote:Thanks for the info. Did you try it by using an NFS connection to a NAS or with a direct attached storage?(2015-11-07, 15:25)Caramba69 Wrote: I will check this tomorrow as well. Perhaps also somebody else can check?
Skipping works for me.
I use a nas via smb.
2015-11-10, 14:06
2015-11-10, 15:59
(2015-11-10, 14:06)beertank Wrote:(2015-11-10, 02:31)Really? Wrote:(2015-11-10, 01:25)Milhouse Wrote: New OpenELEC Jarvis build #1109
[*]Add i2s patches, hopefully fix broken audio devices
Works!
Yes. Hifiberry DAC+ working fine now here too.
PiDigiAmp+ fro IQaudio also working again.
Thanks for the fast work in getting this going again
2015-11-10, 17:13
I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...
2015-11-10, 17:23
(2015-11-10, 17:13)gara93 Wrote: I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...
Are you using a Milhouse build or something else?
Note: there is also a stable OE 6 build which may be a separate choice.
If you are using a Milhouse build, then post a debug log (wiki).
2015-11-10, 17:51
(2015-11-10, 00:57)popcornmix Wrote:(2015-11-09, 23:52)polo_joe Wrote: I now tried
hvs_priority=0x01000000 and v3d_clock=400
no artefacts but glitches when watching hd channel servus tv.
Can you wind the "N" up? E.g. try 0x08000000 and if still no glitches try 0x0C000000 etc.
with 0x08000000 I still get some artefacts and discontinuities in tvheadend
with 0x0C000000 the same but more often
v3d_clock=400
so 0x08000000 points into the right direction
2015-11-10, 17:54
2015-11-10, 18:28
2015-11-10, 18:51
2015-11-10, 18:57
2015-11-10, 19:06
there are no frame drops neither with nor without v3d_freq=400
only discontinuities in tvheadend log
2015-11-10 18:04:00.276 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 4)
2015-11-10 18:04:37.249 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 5)
2015-11-10 18:04:49.246 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 7)
only discontinuities in tvheadend log
2015-11-10 18:04:00.276 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 4)
2015-11-10 18:04:37.249 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 5)
2015-11-10 18:04:49.246 TS: Astra 19,2/11302.75H/ServusTV HD Oesterreich: H264 @ #3583 Continuity counter error (total 7)
2015-11-10, 19:58
I understand that tvh also has to work and it is a development build with purpose of making things work, but would highly recommend VDR, which is rock solid and works perfectly!
2015-11-10, 20:39
(2015-11-10, 17:23)popcornmix Wrote:(2015-11-10, 17:13)gara93 Wrote: I'm using this beta on rpi2 and i'm here to explain some small bugs...
I update from openele 5.0.8 because I had some issues with ipvt simple client...now this add on is ok.
But I find this bug on jarvis: when I play a video in full screen mode ( from film, tv shows, or live tv) the system in too slow! There wasn't this issue on openelec 5.0.8...
Are you using a Milhouse build or something else?
Note: there is also a stable OE 6 build which may be a separate choice.
If you are using a Milhouse build, then post a debug log (wiki).
There is a stable OE 6 with jarvis 16? i try the stable version with isengaardand I have Always problems with pvr..
however i'm using a Milhouse build. and this is my log: (kodi log uploader doesn't work..)
http://www.filedropper.com/kodi_2