2016-06-27, 19:04
This looks kinda bad hehe
I dont see any reference, this drive works perfectly under latest stable OpenElec
//edit
Ah gettig some feedback
// Last not least 2nd edit.
I cannot see it anywhere in the New Skin, nor through file manager. Cannot add is as a source either :S
Code:
LibreELECw:~ # dmesg | grep usb
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=UUID=e2d05cb3-52a7-4c13-811c-ff9918556efe disk=UUID=13b65e6b-74a7-4a65-910f-49359823f7b3 quiet
[ 0.592626] usbcore: registered new interface driver usbfs
[ 0.592639] usbcore: registered new interface driver hub
[ 0.592654] usbcore: registered new device driver usb
[ 0.745668] usbcore: registered new interface driver rtsx_usb
[ 0.758303] usbcore: registered new interface driver uas
[ 0.758330] usbcore: registered new interface driver usb-storage
[ 0.789318] usbcore: registered new interface driver usbhid
[ 0.789324] usbhid: USB HID core driver
[ 1.114939] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.246126] usb 1-4: string descriptor 0 read error: -22
[ 1.524888] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.699548] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1.699661] scsi host2: usb-storage 1-5:1.0
[ 3.281104] usbcore: registered new interface driver ath3k
[ 3.281579] usb 1-4: USB disconnect, device number 2
[ 3.284714] usbcore: registered new interface driver btusb
[ 3.591476] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 3.766957] usb 1-4: string descriptor 0 read error: -22
[ 18.606984] input: BD Remote Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/bluetooth/hci0/hci0:21/0005:054C:0306.0001/input/input14
LibreELECw:~ # lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13fd:084c Initio Corporation
Bus 001 Device 004: ID 13d3:3393 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I dont see any reference, this drive works perfectly under latest stable OpenElec
//edit
Ah gettig some feedback
Code:
scsi host2: usb-storage 1-6:1.0
[13782.135792] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD SE-406AB TS00 PQ: 0 ANSI: 0
[13782.142033] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[13782.142512] sr 2:0:0:0: Attached scsi CD-ROM sr0
[13782.143150] sr 2:0:0:0: Attached scsi generic sg1 type 5
// Last not least 2nd edit.
I cannot see it anywhere in the New Skin, nor through file manager. Cannot add is as a source either :S