•   
  • 1
  • 140
  • 141
  • 142(current)
  • 143
  • 144
  • 355
  •   
  Thread Closed
v18 LibreELEC Testbuilds for x86_64 (Kodi 18.0)
@HiassofT

Your command shows nothing at my system
(2017-11-15, 14:49)pacoma2610 Wrote: Your command shows nothing at my system

Run "ir-ctl -t 100000" while kodi is running. After that the remote should operate normally (if my theory is correct).

That command won't output anything but change the configuration of your IR receiver - more precisely it sets the idle timeout to 100ms. The default idle timeout of the ite-cir receiver seems to be 200ms which I think causes the issue you are seeing.

so long,

Hias
Tested this command on my Nuc Kaby Lake (i was just curious although i could fix it with the repeat function on my harmony) and after running @HiassofT command, double keystrokes are gone (with harmony repeat on level 3).
After rebooting the system, the problem with double keystrokes recurs again and i had to run the command again to get a "normal" behaviour.

ps: with "ir-ctl -t 100000" and harmony on repeat level 3, the remote is working much more smoother for me.
(2017-11-15, 13:08)xxxnelly Wrote: Hi Milhouse, 

I am using a shared tvheadend server for all my 3 Kodi clients, this is in the loft and so I don't use addon - so its defo not that.
After alot of trial and error I found the breaking build - its build #0124, the last working one is #0117. I assume it will be the kernel update then or what more info would confirm the issue?  

Thanks

#0124, 24-Jan-2017: Generic -- Release post (New 4.9.5 kernel; libcec, libnfs, kodi updates; updated media_build package)
#0117, 18-Jan-2017: Generic -- Release post (Bump e2fsprogs and populatefs; default to CONFIG_TCP_CONG_BBR; disable ADSP support)

Difficult to say for sure, lots of changes in #0124, but minor kernel bumps don't usually cause too many issues. Maybe this is more likely:
(2017-01-24, 23:50)Milhouse Wrote:
  1. XBMC:
    • [PVR][Settings] Remove 'hide connection lost warning' setting and code. (PR:11500, 1 commit, 5 files changed)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2017-11-15, 15:04)HiassofT Wrote: Run "ir-ctl -t 100000" while kodi is running. After that the remote should operate normally (if my theory is correct).

That command won't output anything but change the configuration of your IR receiver - more precisely it sets the idle timeout to 100ms. The default idle timeout of the ite-cir receiver seems to be 200ms which I think causes the issue you are seeing. 

i run on my Nuc this command, now remote is normally and no double command
(2017-11-14, 23:13)HiassofT Wrote:
(2017-11-14, 21:49)TimoJ Wrote: Is there a command/setting that allows to change keyboard repeat rate in Kodi? I have tried xset and kbdrate but those are not available, and would they even work?  I'm using Flirc that simulates usb keyboard with ir-remote commands and repeat rate is a little too fast.

Create a file /storage/.config/udev.rules.d/70-input-repeat.rules with the following content:
Code:
ACTION=="add", SUBSYSTEM=="input", KERNEL=="event[0-9]*", GOTO="start"
GOTO="end"
LABEL="start"

# don't change eventlircd device settings
ATTRS{name}=="eventlircd", GOTO="end"

# increase repeat delay to 750ms, use 200ms repeat period
RUN+="/usr/bin/ir-keytable --delay=750 --period=200 --device=$devnode"

LABEL="end"
Change the delay and period parameters of ir-keytable to your likings. Note that this will affect all input devices of your system.

so long,

Hias   

It's not working/changing keyboard parameters. Is there a way to run this in command line and see what it says?
New LibreELEC.tv Leia build #1115: Generic
(Supercedes previous build)

SHA256 Checksum: 7ba93483fa02a72bc3cb3f72480c82d6732f5b3579d7bb48435cab024fb2872e (Generic)

Code:
# uname -a
Linux NUC 4.14.0 #1 SMP Wed Nov 15 22:13:53 GMT 2017 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse): devel-20171115221217-#1115-ge4d683c [Build #1115]

# Kodi version
(18.0-ALPHA1 Git:28db1a8). Platform: Linux x86 64-bit

Based on tip of LibreELEC.tv master (e4d683c, changelog) and tip of XBMC master (28db1a8, changelog) with the following modifications: Build Highlights:
  1. Samba: update to samba-4.7.2
Build Details:
  1. LibreELEC.tv:
    • Net-snmp addon (PR:2223, 1 commit, 1 file changed)
  2. XBMC:
    • [Estouchy] add scrollbar to the settings dialog (PR:13039, 1 commit, 1 file changed)
    • Game client dialog: Append "Saved" if emulator has a savestate (PR:13035, 2 commits, 2 files changed)
    • [windows] fixup! zeroing DXGI_SWAP_CHAIN_DESC1 (PR:13050, 1 commit, 1 file changed)
    • Fix image panning using a joystick (PR:12931, 0 commits, 0 files changed)
  3. pvr.octonet:
    • [depends] bump jsoncpp to 1.8.3 (c4af00a)
  4. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] compare (perma): linux: update to linux-4.14.1-preliminary
    • Added: [env] PR:2219 (perma): util-linux: fix typo in blkid patch
    • Added: [env] PR:2221 (perma): samba: update to samba-4.7.2
    • Added: [pkg] PR:70 (perma): [depends] bump jsoncpp to 1.8.3 (pvr.hdhomerun)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
@debutanker @utiltiy thanks a lot for your feedback!

I did some more tests and noticed that the sony protocol now seems to be broken with a lot of IR receivers. I'll report the issue to upstream linux kernel guys.

Until the issue is fixed you can add "ir-ctl -t 100000" to autostart.sh as a workaround.

so long,

Hias
(2017-11-15, 19:27)Milhouse Wrote:
(2017-11-15, 13:08)xxxnelly Wrote: Hi Milhouse, 

I am using a shared tvheadend server for all my 3 Kodi clients, this is in the loft and so I don't use addon - so its defo not that.
After alot of trial and error I found the breaking build - its build #0124, the last working one is #0117. I assume it will be the kernel update then or what more info would confirm the issue?  

Thanks

#0124, 24-Jan-2017: Generic -- Release post (New 4.9.5 kernel; libcec, libnfs, kodi updates; updated media_build package)
#0117, 18-Jan-2017: Generic -- Release post (Bump e2fsprogs and populatefs; default to CONFIG_TCP_CONG_BBR; disable ADSP support)

Difficult to say for sure, lots of changes in #0124, but minor kernel bumps don't usually cause too many issues. Maybe this is more likely:
(2017-01-24, 23:50)Milhouse Wrote:  
  1. XBMC:
    • [PVR][Settings] Remove 'hide connection lost warning' setting and code. (PR:11500, 1 commit, 5 files changed)
Thanks.
The issue is also introduced between libreELEC-Generic.x86_64-7.95.1.tar and libreELEC-Generic.x86_64-7.95.2.tar, and I have to agree that there were no kernel changes between these builds...
https://github.com/LibreELEC/LibreELEC.t...1...7.95.2

More research shows that if you check the changes with your builds....
https://github.com/xbmc/xbmc/compare/bd6...09a0e2dad2
and the 7.95.1/2 builds
http:// https://github.com/xbmc/xbmc/compare/17.....0-Krypton

within Kodi there is a hand full but I think the most likely is...
[PVR] PVR Manager/Clients: Fix stop playback on addon uninstallation. (PR:11515, 1 commit, 2 files changed)

As I said on my windows laptop running latest Kodi (similar build to one in your build) this works, but after reviewing the logs in more detail I see some differences. I see one log line in my libreelec builds that I don't see in my windows build. 
11:05:55.586 T:140681540462336   DEBUG: PVRManager - Stop - stopping PVR playback

And this is the message is in the changed method highlighted above - Is it possible to do a build for me with this change reverted - it would take hours and hours for me to do a build otherwise.  

Thanks
--
Frontend : OpenELEC PVR runnig on Acer Revo 3700
Backend : Ubuntu 11.10 running with TVHeadend 1 x DVB-T, 1 x Dual DVB-S2
Many thanks for your efforts @HiassofT !
If anyone wants to track the status, kernel bugreport is here: https://marc.info/?l=linux-kernel&m=151084656826568&w=2

so long,

Hias
Thank you Hias Blush
(2017-11-16, 13:30)xxxnelly Wrote: Is it possible to do a build for me with this change reverted - it would take hours and hours for me to do a build otherwise.  

Unfortunately too much time has passed and it's not possible to easily revert PR11515 from current Kodi master - the CPVRManager::Stop() method has changed a lot since PR11515 so simply reverting the effects of the PR with current Kodi master would not reproduce the same behaviour, and I'd have to go back to a version of Kodi in use at the time of PR11515, which would also mean rolling back a lot of LibreELEC changes so it's not a trivial requrest.

The best person to talk with about this would be @ksooo, perhaps he can suggest a testing patch as that might be easier to build.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
New LibreELEC.tv Leia build #1116: Generic
(Supercedes previous build)

SHA256 Checksum: 087b98c2077042f9cfc3638785b8382cef36a1d782c99505482e35f490337cf4 (Generic)

Code:
# uname -a
Linux NUC 4.14.0 #1 SMP Thu Nov 16 21:31:09 GMT 2017 x86_64 GNU/Linux

# lsb_release
LibreELEC (Milhouse): devel-20171116212859-#1116-g298a1c2 [Build #1116]

# Kodi version
(18.0-ALPHA1 Git:28db1a8). Platform: Linux x86 64-bit

Based on tip of LibreELEC.tv master (298a1c2, changelog) and tip of XBMC master (28db1a8, changelog) with the following modifications: Build Highlights:
  1. jsoncpp deprecated function changes in PVR addons (no pvr.argustv - yet, needs more work)
Build Details:
  1. LibreELEC.tv:
    • samba: update to samba-4.7.2 (PR:2221, 1 commit, 1 file changed)
    • heimdal: Disable OTP (PR:2218, 1 commit, 1 file changed)
  2. Additional commits/pull requests/changes not yet merged upstream:
    • Added: [env] PR:2225 (perma): glibc: fix perl
    • Added: [pkg] PR:55 (perma): Fix deprecated function warnings (pvr.pctv)
    • Added: [pkg] PR:75 (perma): support PVR API 5.7.0 changes (pvr.argustv)
    • Added: [pkg] PR:103 (perma): jsoncpp deprecated function change (pvr.stalker)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
(2017-11-15, 22:57)TimoJ Wrote:
(2017-11-14, 23:13)HiassofT Wrote:
(2017-11-14, 21:49)TimoJ Wrote: Is there a command/setting that allows to change keyboard repeat rate in Kodi? I have tried xset and kbdrate but those are not available, and would they even work?  I'm using Flirc that simulates usb keyboard with ir-remote commands and repeat rate is a little too fast.

Create a file /storage/.config/udev.rules.d/70-input-repeat.rules with the following content:
Code:
ACTION=="add", SUBSYSTEM=="input", KERNEL=="event[0-9]*", GOTO="start"
GOTO="end"
LABEL="start"

# don't change eventlircd device settings
ATTRS{name}=="eventlircd", GOTO="end"

# increase repeat delay to 750ms, use 200ms repeat period
RUN+="/usr/bin/ir-keytable --delay=750 --period=200 --device=$devnode"

LABEL="end"
Change the delay and period parameters of ir-keytable to your likings. Note that this will affect all input devices of your system.

so long,

Hias      

It's not working/changing keyboard parameters. Is there a way to run this in command line and see what it says?   

Nothing seems to help. I also tried with copied and modified 70-input-repeat.rules file from usr/lib/udev/rules.d but still the same. I guess all this doesn't change keyboard repeat rate and there is still some other setting for it? Or is there a bug and LibreELEC is not using/detecting .rules files from /storage/.config/udev.rules.d ? Any way to verify this?
  •   
  • 1
  • 140
  • 141
  • 142(current)
  • 143
  • 144
  • 355
  •   
  Thread Closed
 
Thread Rating:
  • 24 Vote(s) - 4.5 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for x86_64 (Kodi 18.0)4.524