2020-12-25, 13:57
(2020-12-25, 11:12)hoppel118 Wrote: Are all 5 makeMKV test files working for you? What are your Shield and Kodi settings exactly?
At one point I was able to play all 5 files. All of them displayed video, although the P4 file sometimes had wrong / over-saturated colours (but not always).
But it's very erratic. The delay settings seems to have some influence. Looks like 3.5 seconds is the sweet spot where I have the most success.
At some point, all videos started to display only a black screen with sound and I had to restart the Shield to get it working again. Sometimes it just helps to switch DV off and back on again on the Shield.
- The Shield is set to 4K 59.940 Hz with Dolby Vision enabled. This automatically sets the custom display mode to "3840x2160 59.940 Hz, YUV 422 12-bit Rec. 2020, Dolby Vision and HDR10 ready"
- Match content colour space is enabled on the Shield
- Shield is connected through a Denon AVR-X2300W with HDMI passthrough enabled
- Philips 48OLED935 has HDMI Ultra enabled on the HDMI ports
- Kodi -> System -> Display is set to:
- Resolution: 3840x2160p
- Refresh rate: 59.94
- Delay after change of refresh rate: 3.5 seconds
- Whitelist: Only selected all 3840x2160 resolutions (so I can use the Shield's AI upscaling for 1080p material)
- Allow 3:2 pulldown refresh rates: Disabled
- Allow double refresh rates: Disabled
- Resolution: 3840x2160p
- Kodi -> Player -> Videos
- Adjust display refresh rate: On start/stop
- Sync playback to display: Disabled
- Render method: Auto detect
- Enable HQ scalers for scaling above: 100% (so the Kodi scalers are not used and I can use the Shield's AI upscaling)
- Allow HA - Mediacodec (Surface): Enabled
- Allow HA - Mediacodec: Enabled
- Use display HDR capabilities: Enabled
- Adjust display refresh rate: On start/stop