2020-08-10, 12:25
@AchillesPunks : Reminder for Large Picture View ?
(2020-08-10, 12:25)nazim12 Wrote: @AchillesPunks : Reminder for Large Picture View ?I'm a little closer but will not be until Wednesday till I can start editing it again. You will only be able to use this layout for the 3rd widget on the Home screen for right now. So you will set the layout for the 3rd row to Highlight Layout.
(2020-08-10, 07:58)spinecho Wrote:(2020-08-10, 00:31)HugoL Wrote:Sorry, should've been more specific.(2020-08-10, 00:21)spinecho Wrote: Tried your suggestion and unfortunately it did not work. Still have a blank space where the rating should be.
Thanks for trying, though.
New update:
Old version:
Ok but did you actually try a 15 cert film since the file names I have you would only show up on a 15 cert
Instead of using a 15 certificate, I changed all 7 UK icons/png in mpaa folder to 12 rating using your nomenclature as the first movie showing (Flash Gordon) is a 12 and I also tried several 12 rated movies ;-)
Unfortunately didn't work. :-(
I checked a movie nfo created by Ember and saw that the rating was: UK:12 in <mpaa> & <certification> code.
This worked om earlier mod version, so I tried renaming some of the icon/png in mpaa folder to UK:12, Rating UK:12 etc as you suggested above (swapping the hyphen for colon).
Still did not work.
Any further help would be greatly appreciated :-)
(2020-08-10, 13:48)AchillesPunks Wrote:That's gorgeous!(2020-08-10, 12:25)nazim12 Wrote: @AchillesPunks : Reminder for Large Picture View ?I'm a little closer but will not be until Wednesday till I can start editing it again. You will only be able to use this layout for the 3rd widget on the Home screen for right now. So you will set the layout for the 3rd row to Highlight Layout.
(2020-08-10, 14:07)HugoL Wrote:Thanks as always for your help.(2020-08-10, 07:58)spinecho Wrote:(2020-08-10, 00:31)HugoL Wrote: Ok but did you actually try a 15 cert film since the file names I have you would only show up on a 15 certSorry, should've been more specific.
Instead of using a 15 certificate, I changed all 7 UK icons/png in mpaa folder to 12 rating using your nomenclature as the first movie showing (Flash Gordon) is a 12 and I also tried several 12 rated movies ;-)
Unfortunately didn't work. :-(
I checked a movie nfo created by Ember and saw that the rating was: UK:12 in <mpaa> & <certification> code.
This worked om earlier mod version, so I tried renaming some of the icon/png in mpaa folder to UK:12, Rating UK:12 etc as you suggested above (swapping the hyphen for colon).
Still did not work.
Any further help would be greatly appreciated :-)
Yeah it’s the “UK:” prefix. I personally don’t know how to get around that without you having to change the prefix.
I think Ember needs to change the prefix to “Rated 12” instead of UK:12.
You can test it just by doing one edit yourself. If you edit an NFO file with the “Rated” prefix, refresh the movie and it should show up. Just make sure to have the original named file names for the pngs.
There’s got to a better way though. I just can’t figure it out.
(2020-08-10, 15:07)spinecho Wrote:There's obviously something very freaky going on with my install!(2020-08-10, 14:07)HugoL Wrote:Thanks as always for your help.(2020-08-10, 07:58)spinecho Wrote: Sorry, should've been more specific.
Instead of using a 15 certificate, I changed all 7 UK icons/png in mpaa folder to 12 rating using your nomenclature as the first movie showing (Flash Gordon) is a 12 and I also tried several 12 rated movies ;-)
Unfortunately didn't work. :-(
I checked a movie nfo created by Ember and saw that the rating was: UK:12 in <mpaa> & <certification> code.
This worked om earlier mod version, so I tried renaming some of the icon/png in mpaa folder to UK:12, Rating UK:12 etc as you suggested above (swapping the hyphen for colon).
Still did not work.
Any further help would be greatly appreciated :-)
Yeah it’s the “UK:” prefix. I personally don’t know how to get around that without you having to change the prefix.
I think Ember needs to change the prefix to “Rated 12” instead of UK:12.
You can test it just by doing one edit yourself. If you edit an NFO file with the “Rated” prefix, refresh the movie and it should show up. Just make sure to have the original named file names for the pngs.
There’s got to a better way though. I just can’t figure it out.
At work at the moment, but I'll give it a test later and report back.
(2020-08-10, 19:53)spinecho Wrote:(2020-08-10, 15:07)spinecho Wrote:There's obviously something very freaky going on with my install!(2020-08-10, 14:07)HugoL Wrote: Yeah it’s the “UK:” prefix. I personally don’t know how to get around that without you having to change the prefix.Thanks as always for your help.
I think Ember needs to change the prefix to “Rated 12” instead of UK:12.
You can test it just by doing one edit yourself. If you edit an NFO file with the “Rated” prefix, refresh the movie and it should show up. Just make sure to have the original named file names for the pngs.
There’s got to a better way though. I just can’t figure it out.
At work at the moment, but I'll give it a test later and report back.
I'm running CoreElec 9.2.4 on a S905W box and so far everything working great.
I am in UK and have everything in Kodi/CoreElec set up to reflect this.
I seem to have 2 versions of TMDB scraper installed...v 5.2.1 & 3.5.3...I cannot uninstall either.
I have set both up to scrape en language and gb (UK) certificate.
However, if I scrape a movie from Kodi (not using Ember) then I always get a US certificate [emoji2369]
I have no idea!!!
I tried your suggestion @HugoL by changing an nfo, but neither this nor scraping (see above) works. I still get a blank space where certificate/rating should be.
So my options are:
Old version with small logo but monochrome ratings work
New version with large logo but no ratings!!!
Still a fantastic skin, though.
(2020-08-10, 20:05)HugoL Wrote:@HugoL , that would be awesome, thanks!(2020-08-10, 19:53)spinecho Wrote:(2020-08-10, 15:07)spinecho Wrote: Thanks as always for your help.There's obviously something very freaky going on with my install!
At work at the moment, but I'll give it a test later and report back.
I'm running CoreElec 9.2.4 on a S905W box and so far everything working great.
I am in UK and have everything in Kodi/CoreElec set up to reflect this.
I seem to have 2 versions of TMDB scraper installed...v 5.2.1 & 3.5.3...I cannot uninstall either.
I have set both up to scrape en language and gb (UK) certificate.
However, if I scrape a movie from Kodi (not using Ember) then I always get a US certificate [emoji2369]
I have no idea!!!
I tried your suggestion @HugoL by changing an nfo, but neither this nor scraping (see above) works. I still get a blank space where certificate/rating should be.
So my options are:
Old version with small logo but monochrome ratings work
New version with large logo but no ratings!!!
Still a fantastic skin, though.
You can still have larger logos with old ratings. I can send you the required xmls.
(2020-08-10, 19:53)spinecho Wrote:I can put the old ratings back into the GitHub. That way you keep the large logo. I'm still trying to get a switch to work so we can change from us to UK.(2020-08-10, 15:07)spinecho Wrote:There's obviously something very freaky going on with my install!(2020-08-10, 14:07)HugoL Wrote: Yeah it’s the “UK:” prefix. I personally don’t know how to get around that without you having to change the prefix.Thanks as always for your help.
I think Ember needs to change the prefix to “Rated 12” instead of UK:12.
You can test it just by doing one edit yourself. If you edit an NFO file with the “Rated” prefix, refresh the movie and it should show up. Just make sure to have the original named file names for the pngs.
There’s got to a better way though. I just can’t figure it out.
At work at the moment, but I'll give it a test later and report back.
I'm running CoreElec 9.2.4 on a S905W box and so far everything working great.
I am in UK and have everything in Kodi/CoreElec set up to reflect this.
I seem to have 2 versions of TMDB scraper installed...v 5.2.1 & 3.5.3...I cannot uninstall either.
I have set both up to scrape en language and gb (UK) certificate.
However, if I scrape a movie from Kodi (not using Ember) then I always get a US certificate [emoji2369]
I have no idea!!!
I tried your suggestion @HugoL by changing an nfo, but neither this nor scraping (see above) works. I still get a blank space where certificate/rating should be.
So my options are:
Old version with small logo but monochrome ratings work
New version with large logo but no ratings!!!
Still a fantastic skin, though.
(2020-08-11, 08:17)spinecho Wrote: @AchillesPunks sorry, very stupid question... How do I download these from GitHub?Front page.