Posts: 17
Joined: Feb 2017
Reputation:
0
2017-02-21, 21:05
Hello All, I am new here and to Kodi in general. I've learned a lot from different You-tubers and articles written online. However I can not find anything on how to solve an issue I have with the sound on movies dropping out for a half sec and then back. This seems to occur every 20 secs or so and becomes extremely annoying. I've tried so many various setting in the audio that I have completely lost track. I am using Kodi 17.0 on an Android box.
these are my current advanced settings:
<advancedsettings>
<cache>
<buffermode>1</buffermode>
<cachemembuffersize>139460608</cachemembuffersize>
<curlclienttimeout>15</curlclienttimeout>
<curllowspeedtime>15</curllowspeedtime>
<readfactor>5.0</readfactor>
</cache>
</advancedsettings>
Let me know if there is other info I need to provide...
Thank you![/color]
Posts: 17
Joined: Feb 2017
Reputation:
0
2017-02-22, 16:01
(This post was last modified: 2017-02-22, 16:06 by LeftHandy.)
I will try that tonight, could it just be a 17.0 issue? I've heard many comments that people are going back to 16.1 because of all the glitches in 17.0.
Any truth to this?
Also, what kind of log to you need? There are no errors thrown so nothing shows up in the error log. I am also not familiar with "public pastebins" is there one people usually use.
Thanks for your time and patience.
Posts: 75
Joined: Nov 2015
Reputation:
0
Hmmmm... sounds familiar to a problem I had. What type of box are you using and what are the specs? Curious - is this DTS and AC3 drop outs only? Or does all audio drop out?
Posts: 17
Joined: Feb 2017
Reputation:
0
I have a MBOX Android 5.1TV Box Amlogic S905 Quad 64 ARM Cortex A53 CPU, 1G DDR3 +8G eMMC Flash, Support UHD 2k x 4K , HDMI 2.0 port, 1G ethernet.
I have a Samsung TV running HDMI to the MBOX and optical out to a JBL soundbar w/Sub. Currently I have all DSP disabled, DTS and AC3 are off.
I've tried running on 2.0 and 2.1. I have tried tweaking all kinds of different settings and combinations of setting with no luck.
I have also been through all of the wiki info above.
I will turn on debugging tonight and see if I can pull any useful info out of this thing.
If I don't get this solved my wife is going to make me go back to cable! NOOOOOOOOOO!!!!!!!
Posts: 1
Joined: Feb 2017
Reputation:
0
So I have this similar issue when I play HD Audio (Atmos and other HD Audio Formats). For example, lets say when "Universal Studios" is spinning around the globe, whatever audio they have drops out twice about 5-10 seconds in. The drop just sounds like a stutter. This does not happen when test using SPMC or PLEX. I have the newest Shield TV running Kodi 17.0 (Krypton) and a Denon Receiver. I have checked the wikis, adjusted settings as mentioned in this and other post. Also ensured the settings for sync video playback is OFF.
I am just confused why in SPMC it works fine and KODI 17, it doesn't?
Let me know if you need any additional information or screenshots of my setup.
Thank you!
Posts: 75
Joined: Nov 2015
Reputation:
0
Oh and the config should be 2.0, AC3 Enabled, DTS Enabled, Passthrough Enabled. Thats it. And to be clear I run HDMI to my LED TV and TOSLINK Optical out to my Yammy AVR. Most of my content is 1080p MKV with DTS 5.1. And mine works great with Krypton now.
Posts: 17
Joined: Feb 2017
Reputation:
0
2017-02-22, 22:49
(This post was last modified: 2017-02-23, 01:05 by PatK.)
ok so if a AMlogic box is sh-tty hardwear, what is the suggested "good" hardware?