(2018-11-06, 11:13)Milhouse Wrote: (2018-11-06, 00:45)jmerrilljr Wrote: (2018-11-05, 21:18)Milhouse Wrote: So this might be an old problem if you experienced it with #1102. Knowing the first build with this issue is the first step to solving it. Can you go back through the builds and identify the first build with this behaviour?
The problem begins with #1023. Here's the log: http://ix.io/1r6v.
Can you compare #1016x (4.19-rc8) and #1016 (4.18.14) - the only difference should be the kernel (and also the DVB add-ons were not included in 4.19-rc8).
Can you also post the output of dmesg | pastebinit
. The results of your iperf test would be interesting.
Here is the dmesg | pasteinit:
http://ix.io/1raX. #1016 plays fine. #1016x does not.
iperf -c 10.0.1.55 -u -P 1 -i 1 -p 5001 -f G -b 100.0M -t 10 -T 1
------------------------------------------------------------
Client connecting to 10.0.1.55, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 0.00 GByte (default)
------------------------------------------------------------
[ 4] local 10.0.1.4 port 59448 connected with 10.0.1.55 port 5001
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 1.0- 2.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 2.0- 3.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 3.0- 4.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 4.0- 5.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 5.0- 6.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 6.0- 7.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 7.0- 8.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 8.0- 9.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 9.0-10.0 sec 0.01 GBytes 0.01 GBytes/sec
[ 4] 0.0-10.0 sec 0.12 GBytes 0.01 GBytes/sec
[ 4] Sent 85471 datagrams
read failed: Connection refused
[ 4] WARNING: did not receive ack of last datagram after 1 tries.
Done.