If you do have good reception and things are OK on the WMC side, then you can tweak ServerWMC settings to try and wait longer for some audio tracks to appear
In the config.xml file in %ProgramData%\VDSoftware\ServerWMC change the following settings and restart ServerWMC
RemuxParseMinHeadersForAudio
RemuxParseMaxHeadersForAudio
The minimum defaults to 500 but in your case after processing 500 headers we still havent found any audio tracks. So try upping the minimum to some larger value (eg 1000 or 2000 or whatever).
The maximum defaults to 1000 and specifies at what point we give up on any unidentified audio tracks (if any were found). In your case, we arent hitting that because at the 500 mark we havent found any audio tracks at all, so we exit at that point (this may be a slight logic flaw, we probably should check that we have some audio tracks at this point otherwise loop up to the maximum value specified
).
Anyway you should set Maximum to be a larger value than minimum.
A shotgun approach would be minimum 5000 maximum 10000 and lets see what happens then. You can try different values, what you are looking for is some audio tracks to be listed in this section of log:
Code:
2014/01/14 02:47:52.838 Parse> Descriptor pass done, using 500 guids in 0.83 sec
2014/01/14 02:47:52.838 Parse> Total Descriptor parse time: 2.82 sec
2014/01/14 02:47:52.838 Pass 'Descriptor':
2014/01/14 02:47:52.838 > WtvToPesDemuxer::Parse> total guid headers processed: 500
2014/01/14 02:47:52.838 > WtvToPesDemuxer::Parse> total data packets processed: 139
2014/01/14 02:47:52.838 Remux::FindDescriptors> wtv scanned (2.83 sec), Streams found:
2014/01/14 02:47:52.838 > Other: ID:41 MS TV Caption
2014/01/14 02:47:52.838 > Video: ID:42 MPEG-2 MP-ML 720x576i fps: 25 AR: 4:3
2014/01/14 02:47:52.838 Remux::FindDescriptors> Output streams:
2014/01/14 02:47:52.838 > Video: ID:42 MPEG-2 MP-ML 720x576i fps: 25 AR: 4:3
2014/01/14 02:47:52.838 Remux::FindDescriptors> warning: no audio streams found