2015-10-06, 07:33
With a fresh Kodibuntu install, I'm having the inability to bitstream DTS-MA / DD TrueHD. I opted to try this route after running Kodi on Windows had the same issues with a bit less ability to troubleshoot.
Here's my current setup:
Kodi 15.1
HTPC w/ Intel Graphics 4000
HDMI out to a Classe Sigma SSP AVR
Audio device in kodi.log:
ELD Info:
When I go to play an mkv with one of the associated formats, a few things happen:
Dolby TrueHD: Dolby TrueHD appears on my AVR, but with no bitrate associated and no audio.
DTS-MA: DTS-MA appears on the AVR, but with '2.0' (Indicates it's only 'seeing' 2 channels) and no associated bitrate and again no audio.
In both situations, if I 'fast-forward' the video I get a horrid static output until I stop the video. All other formats- Dolby, DTS, etc passthru just fine.
The only way I can get it to 'work' is if I disable passthru and then outputs PCM 7.1 @ 48khz to the AVR.
It's almost as if the AVR & kodibuntu aren't locking the same bitrate.
Any help would be greatly appreciated.
Here's my current setup:
Kodi 15.1
HTPC w/ Intel Graphics 4000
HDMI out to a Classe Sigma SSP AVR
Audio device in kodi.log:
Code:
01:25:27 T:140545193277376 NOTICE: Device 4
01:25:27 T:140545193277376 NOTICE: m_deviceName : hdmi:CARD=PCH,DEV=1
01:25:27 T:140545193277376 NOTICE: m_displayName : HDA Intel PCH
01:25:27 T:140545193277376 NOTICE: m_displayNameExtra: CLE Sigma SSP on HDMI
01:25:27 T:140545193277376 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
01:25:27 T:140545193277376 NOTICE: m_channels : FL,FR,LFE,FC,BL,BR,SL,SR
01:25:27 T:140545193277376 NOTICE: m_sampleRates : 32000,44100,48000,88200,96000,176400,192000
01:25:27 T:140545193277376 NOTICE: m_dataFormats : AE_FMT_DTS,AE_FMT_AC3,AE_FMT_LPCM,AE_FMT_EAC3,AE_FMT_TRUEHD,AE_FMT_DTSHD,AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_AAC
ELD Info:
Code:
kodibuntu@kodibuntu:/proc/asound/card0$ cat eld#3.1
monitor_present 1
eld_valid 1
monitor_name Sigma SSP
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x3] CEA-861-B, C or D
manufacture_id 0x850d
product_id 0x321
port_id 0x0
support_hdcp 0
support_ai 1
audio_sync_delay 0
speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC
sad_count 7
sad0_coding_type [0x7] DTS
sad0_channels 8
sad0_rates [0x6e0] 32000 44100 48000 88200 96000
sad0_max_bitrate 448000
sad1_coding_type [0x2] AC-3
sad1_channels 8
sad1_rates [0x6e0] 32000 44100 48000 88200 96000
sad1_max_bitrate 448000
sad2_coding_type [0x1] LPCM
sad2_channels 8
sad2_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad2_bits [0xe0000] 16 20 24
sad3_coding_type [0x1] LPCM
sad3_channels 2
sad3_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad3_bits [0xe0000] 16 20 24
sad4_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus)
sad4_channels 8
sad4_rates [0x1880] 48000 176400 192000
sad5_coding_type [0xc] MLP (Dolby TrueHD)
sad5_channels 8
sad5_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad6_coding_type [0xb] DTS-HD
sad6_channels 8
sad6_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
When I go to play an mkv with one of the associated formats, a few things happen:
Dolby TrueHD: Dolby TrueHD appears on my AVR, but with no bitrate associated and no audio.
DTS-MA: DTS-MA appears on the AVR, but with '2.0' (Indicates it's only 'seeing' 2 channels) and no associated bitrate and again no audio.
In both situations, if I 'fast-forward' the video I get a horrid static output until I stop the video. All other formats- Dolby, DTS, etc passthru just fine.
The only way I can get it to 'work' is if I disable passthru and then outputs PCM 7.1 @ 48khz to the AVR.
It's almost as if the AVR & kodibuntu aren't locking the same bitrate.
Any help would be greatly appreciated.