(2015-03-11, 21:21)joshua99 Wrote: (2015-03-11, 20:10)joshua99 Wrote: (2015-03-11, 12:44)AuXBoX Wrote: joshua99
I've emailed you
Thank you very much, will try to sort it later & let you know the result.
josh.
Just to make sure I get it right this time, these are the files on my sd card;
1. dd
2. fact. update param aml.
3. fact. update param ubt
4. sd bak ( out of uboot MX windows command)
5. spi MX bin
6. uboot MX. bin
7. uboot MX
8. uImage recovery.
9. update stvmx zip file.
Hopefully this is correct ? ? & if it goes to recovery do I flash the zip file first ?
1.Copy all files into SD card root directory
factory_update_param.aml
factory_update_param.ubt
spi_MX.bin
uboot_MX.bin
uImage_recovery
update_stvmx_20130805_eng.zip
uboot_MX.cmd
dd.exe
2.Run uboot_MX.cmd file on PC, it will pop up a window to remind you to continue, just press any button until it automatically exit.
3.Insert SD card into the box;
4.Press and hold the upgrade button, Short pins, plug in power adapter;
5.Hold the button for about 10 seconds, loosen upgrade button and wait about 1-2 minutes(screen has no display at this time),and then normally you will see robot screen;
6.It is updating the firmware, then wait about 2 mins.
7.After finished, the box will restart automatically.
As soon as you see anything on screen release the shorting of the pins
NOTES:
1.Don't use USB disk,only can use SD/TF card.
2.
Don't unplug the power in all process until the upgrade is complete.